How To Repair Carpet Damage By Pets: 5 Easy Steps For Repairing Carpet Damaged By Pets

5 Easy Steps For Repairing Carpet Damaged By Pets

The majority of the people love to have pets at their homes, especially dogs. However, having dogs will not be easy to maintain as they can be very harmful & can be rough on your carpets & upholstery. Pups will even break up & move their claws into rugs as well as carpeting due to boredom or anxiety. This will in turn result in ripping up your carpet & then you will think of replacing your flooring completely, which can be very costly. Rather then replacing the flooring, you can simply fix this issue yourself easily using carpet remnants & save a lot of money. In order to repair the carpet that has been damaged by pets, especially dogs, go through the below mentioned steps carefully & achieve the desired result of your work:

Step 1

The first and the foremost step is to trim a square out of the carpet, making sure that you entirely surround the torn section. The cut should be small enough that will enclose the whole area of the tear. With the help of a carpenter's square, you can easily trim or cut straight lines. Cut through the carpet with the help of a utility knife, but make sure to trim through carpet, not the padding. Now, get rid of the cutout piece of carpet. If required, use the end of a putty knife in order to pry the carpet up.

Step 2

The next step is to trim a piece of cardboard to a shape that is approximately 1 inch larger as compared to the cutout portion of carpet. Take hold of the edge of carpet up throughout the hole you just made. Put in the cardboard inside the hole as well as underneath the carpet. If required, fold the cardboard to a small degree in order to adjust it into the hole.

Step 3

Now, track down the hole onto the cardboard, securing as close to the edge of the hole as possible before taking out the cardboard. Saw the tracked down shape out of the cardboard with the help of a utility knife. Using the carpenter's square, you can easily keep the lines straight.

Step 4

Next, move a matching piece of carpet remnant smoothly upturned. With the help of a marker, track down the cardboard cutout towards the back of the carpet remnant. Trim the shape out of the remnant with the help of a utility knife and carpenter's square in order to create a patch.

Step 5

Finally, trim or cut a piece of double-faced seam tape in order to adjust inside the hole. Put or spread the seam tape to the carpet padding inside the hole. Position the patch from Step 4 inside the hole. Press down smoothly in order to stick it fast to the tape. Use or move a vacuum cleaner over the patched area in order to unify the carpet fibers together, hiding the patch.