Step By Step Process Of Removing Wrought Iron Railing From Concrete
A home's patio stairway or an old fence seems nostalgic with wrought iron railings. However, wrought iron railings soon rust if they are not painted on a regular basis. If someone leans on a railing made of rusted wrought iron, they risk falling. Wrought iron railings may need to be rebuilt since they just don't match a newly renovated home's façade. To give your house a fresh look, remove any obsolete or rusting wrought iron railings from the cement. Your outdoor porches and stairs benefit from the artistic touch of wrought iron railings. If you reside in a humid region, wrought iron posts embedded in concrete may eventually start to rust and degrade. It's time to remove the posts if their condition deteriorates to the point where you can push on them without them shaking or if they even start to come loose from the concrete. The procedure is simple. A reciprocating saw is the main tool used in the procedure. You can obtain one from a rental facility if you don't already have one. Removing Wrought Iron Railing From Concrete is a simple 4-step process, which you can perform at home yourself.
Things You'll Need
- Screwdriver
- Reciprocating Saw
- Orbital Sander
Step By Step Process
- Loosen The Screws Holding The Post To The Railings
The screws that are taking hold of the post to the rails should be loosened. If the screws are rusty, you might need to spray some silicone spray lubricant on them and wait a few minutes for them to dry. To make it simple for you to reach the post, position the rails to the side. - Put On Safety Glasses And Gloves
After loosening the screws, you need to put on your gloves as well as your safety glasses. Cut the corroded wrought iron post off level with the concrete using a reciprocating saw. Get rid of the previous post. - Remove Any Additional Damaged Posts
Now, you need to repeat Steps 1 and 2 in order to remove any additional damaged posts along the railing. - Remove Any Loose And Damaged Concrete
Concrete that is loose or damaged can be removed by sucking it up. As directed on the packaging, mix quick-setting concrete. The damaged section of the deck or steps should be covered with a concrete mixture using a trowel. Leave out or exclude this step if there is no damage other than to the post.