How To Remove Vinyl Flooring: Steps To Get Rid Of Vinyl Flooring Adhesive From Concrete

Steps to Get Rid Of Vinyl Flooring

Here are some of the steps by which the customers can easily Remove Vinyl Flooring:

1. Clear The Room: The customers need to start by detaching all the furnishing products from the floor and then they need to remove all the dust and the debris particles from the floor by using the soft broom.
2. Remove The Trim: The customers then need to remove all the baseboards from the edges and the sides of the wall by using the screwdriver and detaching the nails from the baseboards accordingly.
3. Remove The Nails Or The Staples: The customers then need to detach all the staples or the nails from all the edges of the vinyl planks by using the pry bar.
4. Start Pulling The Vinyl Plank: The customers then have to inspect the edges of the vinyl planks and they need to find the place where the vinyl plank is not either glued. The customers then need to use the utility knife and then trim the strips out there.
5. Scrape Adhesive: The customers then need to work with the strips in order to gently pull the vinyl planks from the floor. The customers then need to use the scrapper in order to pull the vinyl planks from the glued areas.
6. Soften The Hard Adhesive Areas: The customers then need to make a mixture of the soap and the water and spray it over the hard adhesive areas and then let the mixture to sit there for few minutes. The customers then need to use the scrapper in order to remove the vinyl adhesive from the floors.
7. Clean The Floor: The customers finally need to clean the floor by using a soft cloth and then dry the floor by vacuuming it.

How to Remove Vinyl Flooring Adhesive from Concrete?

Here are some of the steps by which the customers can easily remove the Vinyl Flooring Adhesive From the Concrete:

1. Clean The Adhesive: The customers need to start by cleaning the adhesive area on the concrete by using the hand scraper. If using the hand scrapper is difficult to use then they can also use the power scraper. The customers then need to remove all the dust from the concrete by using the soft broom.
2. Use The Adhesive Remover: The customers need to pour the adhesive remover to all the entire surface of the concrete and allow it to be there for few hours. The customers then need to clean the adhesive compound by using the scraper. They then need to pour a small amount of the adhesive compound to the top of the concrete and allow it to be there for one night in order to completely clean the adhesive from the floor.
3. Clean The Concrete: On the very next day, the customers need to Sprinkle the sweeping compound on the entire surface area of the concrete. The customers then need to use the heavy bristled broom to clean the sweeping compound from the concrete.