Steps to Remove Vinyl Flooring Adhesive from Concrete
Here are some of the steps by which the customers can easily Remove Vinyl Flooring Adhesive from Concrete:
- Scrape The Adhesive: The customers need to start by cleaning the adhesive area on the concrete and for that, they need to use a hand scraper. They can also use the power scraper and then they need to clean all the dust from the concrete by using the soft broom.
- Use The Adhesive Remover: The customers can also directly use the adhesive remover and apply it to the entire area of the concrete by using the soft brush. The customers then need to allow the remover compound to sit on the concrete for about few minutes.
- Test The Surface: The customers then need to analyze the surface of the concrete by scratching the small area and if the adhesive compound did not get scratched easily then the customers need to let the adhesive material to dry for little more time.
- Remove The Adhesive Remover: Once the adhesive material is completely dried the customers then need to scrape off the material from the entire surface of the concrete by using the putty knife.
- Repeat The Same Procedure: The customers then need to examine their concrete and if they still find some marks of the adhesive then they need to apply one more layer of the adhesive remover and then repeat the same procedure accordingly. The customers then need to clean the concrete by using a clean damp cloth and let the concrete dry completely.