How To Remove The Back Of A Recliner: Procedure To Get Rid Of The Back Of Different Recliner Types


Procedure To Get Rid Of The Back Of Different Recliner Types

In order to get rid of the back of the recliner, you need to follow the below-described procedure for different recliner types:

The Berkline Recliner

When you try to move your Berkline recliner from one place to another then you will need to take the back off to get it through the door. Removing your back makes it easier to carry & manipulate your chair.
  • First of all, you need to keep your chair or couch away from your wall and then roll it forward to the front lower panel.
  • Now you have to pull the lower bottom of your upholstered fabric or the leather away from your chair, where it is attached, with the help of a hook & loop tape.
  • Next, fold this across the back of your chair in order to expose your chair's mechanism.
  • Now, look for the metal tabs or the thumbs screw halfway betwixt the arms & lower bottom of your chair, and then remove all the thumbscrews but make sure to turn them in counterclockwise direction.
  • For the chair which is equipped with the metal locking tabs, grasp your tabs firmly & then press them forward while pulling the bottom half of your chair back in order to unlock your mechanism.
  • Finally, lift the back straight up and then off your chair. You may also need to gently rock it back & forth to slide the back off all the brackets.

La-Z-Boy Back Removal

La-Z-Boy recliner comes with a lockable back so that you can easily remove it. This process will need a flat-headed or slotted screwdriver. La-Z-Boy recliners which contain loose upholstery have the hook-and-loop tape which keeps your upholstered back attached to your chair base.
  • First of all, you need to roll your chair forward onto the front of your chair in order to make accessible in a position away from your wall.
  • Next, you need to detach both sides of your strip at the bottom to access the back of your recliner. Inspect the internal part of your chair in order to find all the brackets that lock your chair back on either side near the arms.
  • Now you need to pull all the lever that locks the mechanism betwixt the back of your chair & the arms(back) with the screwdriver on both sides of your chair.
  • Now, roll your chair back into the upright position.
  • Next, grab the top of your chair back on both sides and then softly lift the back from your chair.
  • Finally, you need to rock your chair back slightly from side to side and slip your brackets from its tracks.

Simmons Reclining Chair Or Couch

With your Simmons reclining chair/couch or chair in the full upright position, allow your enough room to access the back of the chair/couch easily, lift up your upholstered fabric from the bottom where the fabric is attached with the help of hook-and-loop tape.
  • First of all, you need to roll your fabric up and then cover the back of your chair out of the way.
  • Next, release all the tabs that lock your back in the place by using a flat-headed or slotted screwdriver.
  • Now, with the locking tabs released, then pull-up on your chair back in order to remove it from its brackets.
  • Finally, you need to lift the one side of the bit and then the other side of the bit, walking your chair back-up the brackets before you remove the chair back.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved