Three Easy Methods To Get Rid Of Textured Paint On A Wall
Textured wall paint is an attractive as well as an appealing feature for some of real estate owners, however, for others, it is problematic. If your textured wall paint is stripping off or you just don't like the pattern and design, then you can simply remove textured paint on a wall. Removing textured wall paint is not an easy task at all, but the end result is definitely a smooth flat finish. If you are looking to get rid of textured paint from a wall, then follow one of the below-mentioned methods carefully:
Thing's You Will Need
- Spray Bottle
- Drywall Knife
- 120- To 150-Grit Sandpaper
- Drywall Compound
- Taping Knife
Method 1: Gentle Scraping To Remove The Texture
First of all, take a spray bottle & start spraying warm water on 1 square foot of textured drywall. Allow the area to soak for at least 5 minutes. Using a drywall knife, lightly & firmly scrape at the surface in order to check whether the texture eliminates, chips as well as breaks away from the wall, or whether it remains solid. If the area was texturized with joint compound, water, and a drywall knife can usually get rid of the majority of the texture. Keep doing gentle scraping to get rid of the texture. If the texture was created using plaster, water will not be enough to remove the texture and you need to proceed to the next step.
Method 2: Sand The Wall Surface Using 120- To 150-Grit Sandpaper
The next step is to lightly sand the surface of the wall using sandpaper. Select 120 to 150 grit sandpaper in order to make sure surface abrasion without damaging the drywall. If warm water helps get rid of the majority of the texture, a light sanding will, in all likelihood smooth the wall surface. When it comes to plaster walls, you need heavy continual sanding in order to fully get rid of the textured paint.
Method 3: Apply Drywall Compound To Fill In Major Holes
Finally, level the walls using drywall compound, if in case the texture is too deep, when it comes to complete removal. Put or spread an initial coat of drywall compound in order to fill in major holes as well as deep depressions. Use a taping knife in order to level the wall surface before scraping away excess compound. After the initial application dries, spread a second coat of drywall compound, which will help you level out the surface. Allow the second coat to dry entirely before sanding the wall using 120 to 150 grit sandpaper in order to ensure a smooth flat surface.
Tip & Warning
- Make sure not to apply paint-removing chemicals on your walls. It is easier as well as less harmful to resurface the wall as compared to removing existing paint with chemicals.
- Keep away from sandpaper grit that is having an undesirably strong effect on drywall, due to the reason that it can damage the surface of the wall as well as cause uneven dips in the drywall.