Easy Methods Of Dealing With Different Stains From Unfinished Wood
If you are dealing with unfinished wood, then it is obvious that you will find different kinds of stains. The stains can be general, stubborn, or any other, which you need to remove as soon as possible. The users will find the different methods of dealing with various stains and these methods are mentioned below:
General Stains
- Mineral Spirits: It is highly advisable to wear gloves and properly ventilate the area when working with the mineral spirits. Wet a cloth with a small amount of mineral spirits and wring the cloth to remove out excess so it’s only damp and not dripping.
- Blotting: Blot the stain using the damp cloth until it is removed. Add more mineral spirits if needed.
Oil Stain
- Absorbent Powder: The first step for the oil stains is to Cover up the stain with a thick amount of absorbent powder. The user can choose from Baking soda, Corn starch, Cornmeal, or Wheat germ. Anyone will work, but the best idea is to choose one that is closest in color to the color of the Unfinished wood.
- Overnight: Let the powder to sit for a few hours or overnight. If needed, the user can cover the plastic wrap on the powder to prevent it from blowing off in the wind or stop a pet from walking through it.
- Remove: After the above step is done then vacuum or sweep up the powder. The user can repeat the process many times as needed until the stain is fully removed.
- Mineral Spirits: The other option for removing oil stains is to apply a small number of mineral spirits to the affected area first with a cloth, then covering up with the powder. Be sure to wear the gloves and also properly ventilate the area when working with the mineral spirits.
- Hydrogen Peroxide: Using the hydrogen peroxide will also help to remove oil stain. Apply the little peroxide onto a cloth and then blot the stain.
Difficult Stains
- Sanding: Use the fine-grit sandpaper to lightly sand the affected area.
- Wipe: Frequently wipe away the dust with the cloth and check the progress. Also, ensure not to sand so much wood away that can leave a deep depression.
- Repeat: Until the stain is gone repeat the process or until the user start to wear away the wood.
- Lightly Scuff: If in case the sanding is noticeable, then lightly scuff the rest of the surface with the help of sandpaper so it matches rest of the area.