How To Remove Stains From Oak Using Bleach: Simple Steps To Get Rid Of Stains From Oak Using Bleach



Easy & Simple Steps To Get Rid Of Stains From Oak Using Bleach

Oak is regarded as one of the best & most used types of wood that provides a naturally beautiful & attractive finish for furniture or flooring. However, oak wood is susceptible to stains, due to the reason that it has high tannic acid content, which outlines a black spot as soon as it gets in contact with iron and water. A glass of water that is placed on an oak table in the absence of a coaster can leave behind a stain. You can easily get rid of these stains and bring back or re-establish the beauty of the wood by cleaning it with the help of simple household bleach.
  • Fisrt of all, ventilate your working area & then put on your safety goggles as well as work gloves. After that, clean & wipe the wood with the help of denatured alcohol and a soft rag.
  • The next step is to sand the surface of the oak in order to get rid of the finish.
  • Now, clean the surface with the help of a degreaser to get rid of any grime or oils that may linger.
  • Next, put or spread the chlorine bleach instantly to the stain with the help of a soft rag. Make sure not to mix & thin the bleach with water.
  • Allow the bleach to last & persist on the stain for nearly 10 minutes before cleaning the area.
  • Again, spread the bleach if stains still persist. In the case of scour-resistant stains, you may use a stiff brush.
  • After that, wipe & clean the surface with the help of a damp rag and allow it to dry entirely.
  • Finally, put or spread a new layer of stain or clear varnish in order to protect the wood.

How To Get Bleach Stains Out Of Bare Wood?

A bleach stain on bare wood will make the color of the wood lighter, without regard or consideration for the type of wood that was bleached. Bleach is usually used to get rid of the undesirable stains, and once breached, the wood is again stained to its original color. The term bare wood is actually an inaccurate term. Raw wood is a kind of wood not treated with any stain, coating, or finish, however, bare wood is a natural color wood either waxed, polished, or oiled.
  • Firstly, start sanding the bleach stain with the help of 100-grit sandpaper. Bleach always lifts the wood grain as soon as it comes across the wood. This, in turn, will allow you to sand off the bleach stain as long as you reach the actual wood color underneath it. Immediately after it has been sanded smooth, get rid of the dust using a damp rag.
  • Next, again sand the bleach stain but this time with the help of 280-grit sandpaper. This will help smoothen out the stained area entirely and get rid of the remaining bleach stain. Clean the area with the help of a damp rag when finished.
  • Finally, put or spread your regular brand of furniture polish, wax, or tung oil product. This will give fresh life or strength to the earlier stained area and match it up with the bare wood coloring on the remaining wooden piece. If in case there was an original stain in place that made the wooden piece have a similar appearance to bare wood, spread that stain at this time. For instance, golden oak stain on raw wood makes it appear exactly like bare wood, and it is more often than not referred to as bare wood even though it has been stained.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2021 GetRit.Com   All Rights Reserved