Proper Procedure Of Removing Stains From Laminate Table Top
Tabletops usually make out a lot of activity, which in turn results in a lot of accidents. Laminate tabletops are composed of compressed as well as adhered layers of plastic, & have rigid, largely water-resistant surfaces that are generally very easy to keep clean. However, some of the substances & foods & drinks including ink, rust, hair dye, wine, fruit juice, and coffee can all be the reasons for unpleasant or repulsive stains on a laminate surface. You need to get rid of these stains as soon as possible in order to restore the beautiful look of the table, & then be very careful to prevent future stains. The majority of household products are designed in order to help keep laminate surfaces clean.
Part 1: Maintaining A Clean Surface
- Wipe Up Spills Quickly: The majority of the spills can be tackled very easily if you handle them immediately. When it comes to wet spills, you can use damp paper towels or a washrag, & then clean crumbs with the help of a mini broom, or you can simply use your hands to wipe them away.
- Prepare Your Solution: If you were unable to handle the spills instantly after they occur, then you can use any of the standard household cleaners after going through the back label carefully in order to make sure they are compatible with laminate. If you don't have any solution, then you can combine or put together soap with warm water, or add 2–4 tablespoons (30–59 mL) of vinegar to 1 cup (240 mL) of warm water.
- Wash The Laminate: With the help of a non-abrasive sponge or towel, clean the laminate. If you are using your own solution, wet your sponge before applying it over the laminate. Let it sit and soak in a moment before scrubbing. For a pre-mixed solution, spray it over the laminate and allow it to sit for some time before scrubbing. Use a soft, used toothbrush in order to scrub through seams and metal edging.
- Rinse It With Water: After you finish washing the laminate, it is time to rinse the surface with water in order to get rid of any remaining residue of your cleaning solution. Warm water and a soft towel are the best options for this.
- Dry The Laminate: With the help of a soft dry towel, dry the laminate if you want. You could also allow it to air dry, however, drying it yourself will help you find out whether or not there are any remaining stains. If there are not any stains left, you are done.
Part 2: Cleaning Tough Stains
- Mix Baking Soda Into A Paste: First of all, steadily add water to a bowl of baking soda and then combine or put it together as long as thick paste is formed. Make sure not to form a paste that is too thin, instead, it should be thick.
- Apply The Paste To The Stain: Now, spread the paste on the uppermost part of the stain. The stain should be entirely covered by a layer of paste. Place a paper towel on top of the area in order to keep moisture in.
- Let The Paste Soak In: Leave the stain alone for nearly an hour, but the good idea is to leave it for several hours. Baking soda will take some time to get rid of the stain from the laminate.
- Wipe The Paste Away: Without scrubbing, smoothly wipe as well as clean the laminate surface. Baking soda can be abrasive, therefore, it is important not to scrub and certainly leave micro-scratches on the surface. The majority of the time, this should look after your stain.
- Use A Gentle Solvent On Any Remaining Stain: If there are still stains remaining, it can generally be handled by using a solvent such as a paint thinner or nail polish remover. Spread one of these and smoothly scrub with a soft towel. Make sure to use a white cloth or towel, due to the reason that the solvent could cause the colors to bleed.