Three Easy Ways Of Removing Silicone Caulk From Fiberglass Shower Stall
If you want to remove silicone caulk from your fiberglass shower tall but it sounds to be a difficult task, still don't worry we are here to help you. Simply you just need to go through all the mentioned ways carefully and use the one that is best suited to you:
Way 1: Using Hairdryer
The users can easily get rid of silicone caulk from the acrylic bathtub or fiberglass shower stall by simply taking the help of your hairdryer. Simply set your hairdryer to a high-temperature setting at ideally 212 °F, then heat it at 8–10 inches above the surface for 30–40 seconds. After that, you need to grab a razor blade to scrape it out. Always make sure to remove your hairdryer, as quickly as possible, in order to avoid melting of the silicone caulk & fiberglass shower stall. Remove all silicone caulk before applying the new ones, so that they will not impede your process.
Way 2: Using Scraper
Chemicals will unquestionably cost you a whole lot of money which a scraper won’t & all a scraper needs are your time. Remove the silicone caulk from the fiberglass shower stall by simply scraping the surface with the help of a scraper. It can also be used for removing silicone caulk from your acrylic bathtub without scratching it or damaging it due to its flat surface. You can also make use of any Homax plastic caulk remover tool, which possesses an angled tip for removing silicone caulk from the edges without scratching it.
Way 3: Harsher Method
If the above-given methods are not successful then it’s presumably best to apply this proceeding process. For this possibility, you will be needing the various tools & supplies like a utility knife, bleach, toothbrush, abrasive pad, & a silicone caulk remover.
- Firstly, start by cleaning the dirt on the fiberglass shower stall surface. Next, apply the caulk remover (mineral spirits or lacquer thinner), which in turn makes your silicone caulk soft & will perform the job quickly. Leave the silicone caulk remover on the silicone caulk for 15 – 20 minutes to let it work productively.
- Now, sharp utility knife or painter’s tool should be positioned at a low angle & cut through a silicone caulk. The utility knife's position is extremely important in order to determine the neatness of the work. Then slowly start scraping the silicone caulk and if in case they are too stubborn, make sure to use the plier, which in turn will help you to pull it out effortlessly. You can also apply warm water on the silicone caulk to make your process much easier.
- You need to remove silicone caulk by simply smearing your affected whole area by using bleach mixture. The bleach mixture comprises a ratio of 3:1 of water & bleach. While applying your bleach mixture, rub the shower surface with the toothbrush. The toothbrush adequately removes the silicone caulk when you brush it off marginally after the application of your bleach mixture.
- If you are not sure whether or not the silicone caulk has been profitably removed, you need to wipe your fiberglass shower stall by using an abrasive pad dipped in isopropyl alcohol.
- Clean up simply but comprehensively & leave it to dry for a couple of minutes & after that, you need to vacuum it until it is wholeheartedly free from dirt. Profitable removal of silicone caulk from the fiberglass shower stall is done through cleaning.