Step By Step Process Of Removing Rust Stain From Quarry Tile
Quarry tiles are regarded as one of the dense materials, however, the tiles are still absorbent & spongy except if they have a protective seal coat. They work exceptionally well in outdoor settings, due to the reason that they are durable & long lasting. If you notice any kind of damp metal on quarry tile, it is the indication that the rust develops on the quarry tile. It is important not to wipe up the brown stain quickly, otherwise, it comes right up. If you allow the rust stain to remain on the quarry tile, you will need to make a rust-cleaning poultice in order to clean it up. The poultice have a tendency to act as a wick in order to pull the rust stain out of the clay material in the quarry tile. In order to remove rust stain from quarry tile, go through the below-mentioned step by step process carefully & achieve the desired result of your work:
- Dish Detergent Paste: First of all, you need to mix a few drops of dish detergent with warm water & clean the rust affected area with this solution. Applying this solution on the rust affected area will help you get rid of some of the surface stain. After that, wash out with clear water in order to get rid of soap, detergent, dirt, or impurities.
- Mix Borax Powder With Lemon Juice: Now, combine or put together borax powder with sufficient amount of lemon juice in order to make a paste the consistency of peanut butter. Apply this mixture to the stain affected area. Make sure not to put a thick layer on, you simply need to cover the entire stain well.
- Cover The Poultice: Next, protect the poultice by covering it with plastic food wrap. Secure the sides of the plastic using painter’s tape. Allow the poultice to remain on the stain for at least 24 hours. After that, take out the plastic wrap and tape. If the poultice is not completely dry, then you need to allow it to air-dry before moving on to the next step.
- Scrape The Poultice: Scrape the poultice from the quarry tiles with the help of a nonabrasive tool, for instance, an old plastic spatula. Rinse & clean the area with clear water.
- Mix Another Batch Of Poultice: Finally, mix another bunch of poultice if in case the stain lightens but doesn’t disappear. Put or spread the poultice and cover it for at least 24 hours. Scrape as well as rinse the floor. If the stain still remains, then it is important to call a professional in order to remove it.