In order to make your bathroom area look spotless, you always need to keep its shower caulk and grout bright & clean, however, it is still possible that mold will appear on your shower caulk & as soon as you notice mold get rid of it immediately. Mold and mildew mostly prosper in a warm, moist environment, such as your shower. You have to make sure to kill the mold, it’s not enough to only scrub it away. Getting rid of the mold very early will prevent damage to the walls that usually support the shower tile and caulking. The area where moisture is present for long periods of time is where the mold mostly grows. The relative humidity level in the bathroom should be below 60 percent, otherwise, due to poor ventilation, the spores present in any home will get fixed to the shower caulking and begin to multiply. Mold will most probably be present on wood, soil, cloth, or paper & all of these substances usually occur in the bathroom all the time.
Easy Process Of Removing Mold From Shower Caulking
As soon as the black mold is noticeable on the shower caulking, you need to take the following steps in order to stop the growth process and get rid of the mold from the shower caulking completely. Go through all the steps carefully & achieve the desired result of your work:
- Gather Supplies: First of all, collect all the necessary supplies that will be needed to perform this process. The supplies may include bleach, a mask, gloves, toilet paper, and vinegar.
- Ventilation: Then, keep the working area well-ventilated by opening up a nearby window and also make sure to wear a mask and gloves. After that, take bleach and pour it immediately onto the mold on the caulk.
- Toilet Paper, Or Cotton Balls: Now, take toilet paper, or cotton balls which is totally dependent on the capacity & the size of the mold, and then place them directly on the caulk. If you’re using toilet paper, roll up the toilet paper into a thin snake primarily and set it on the caulk. Using toilet paper or cotton balls will help keep the bleach at its appropriate place and will not permit it to evaporate. Leave the bleach on caulk for nearly 12 hours or the whole night. Due to the reason that bleach is so strong, the best option to do this thing is in the morning, as you can keep the windows open all day, ventilating the space.
- Remove Toilet Paper: Next, take off the toilet paper or cotton balls & your mold should be entirely vanished. If in case the mold problem is minor, you can stop here. However, for a fairly large mold issue, continue on to the next steps.
- Vinegar: Vinegar is another best option to finish the job. Even though bleach performs exceptionally well in getting rid of surface mold, but it didn't perform well at saturating surfaces and killing the mold entirely. Even if there are only small amounts of mold on your silicone, it is highly recommended to follow this step, otherwise, you need to clean the mold again in a couple of short months.
- Apply Vinegar To Mold Affected Area: Put vinegar in a spray bottle and then spread it to the mold-affected area. Leave it on the mold for a couple of hours before rinsing with warm water. It should entirely remove the mold issue. If in case your caulk is very old, or mold is getting back in even after you have cleaned it using bleach and vinegar, take more extreme measures.
- Get To The Root Of The Mold: Sometimes the mold is not present on the surface of your caulk, instead, below the caulk and more likely behind some tiles, too. To get rid of the mold for good, you need to get rid of the caulk and affected tiles. If in case caulk doesn’t come off easily, put or spread caulk remover in order to permit the caulk to loosen from the tub and tiles. With the help of a utility knife, get rid of the caulk as soon as it’s softened. Get rid of the excess mold/mildew behind tiles with the help of a hammer and chisel. Make sure to eliminate just one at a time. As soon as you see any mold or mildew, use the vinegar solution in order to kill mold. Replace the tile using a similar grout color and then finish the job by re-caulking.