Step By Step Procedure & Items Needed To Remove Latex Paint From Cabinets
Latex paint works best for some cabinet surfaces, but oil-based paint is suitable for typical wood or fiberboard kitchen as well as bathroom cabinets. Oil-based paints are considered most durable even if exposed to moisture and heat damage. If in case you wish to make changes to your latex painted cabinets and apply new durable paints, or if you only want to remove the color in order to repaint with a fresh latex exterior, you can get rid of the old paint in just a few hours. Simply gather the certain items required for the process & then go through the below-mentioed steps carefully:
Items Needed
- Dish Soap & Water
- Sponge & Screwdriver
- Liquid Deglosser & Rag
- Chemical Paint Remover
- Paintbrush & Metal Putty Knife
Step By Step Procedure
- The first and foremost step is to make the cabinets clean with the help of dish soap, water, and a sponge. If in case the cabinets are glazed in dirt or oily residue, then the paint stripper won't stick the latex paint successfully.
- Now, detach any plastic hardware from the cabinet. This is due to the reason that plastics tend to melt when revealed to chemical paint removers. There is no need to detach the metal hardware, but you can detach it if in case it gets in your way as you work.
- Next, clean the glossy cabinets with the help of a liquid deglosser and a rag. Liquid deglosser works almost immediately, terminating gloss on contact as you clean the surface. However, latex paint can also be removed without using deglossing, but eliminating the glossy finish will assist the paint turn up with fewer chemical paint remover implementations.
- Spread a chemical paint remover to the interior part of the cabinet with the help of a paintbrush. Chemical paint removers will work as a thick gel, so there is no risk of accidental dripping. If in case you drip paint remover onto a convenient entity, clean it up with a damp rag instantly. Chemical paint removers produce sparkle on the painted surface as they operate. Allow the paint remover to remain on the surface for nearly 15 minutes or until the sparkle stops.
- After the above steps are done, now it is time to brush off the paint remover and unfastened paint layers with the help of a metal putty knife.
- If in case any patches of paint are still visible, then you need to repeat steps 4 and 5. Latex paint is considered as one of the easiest types of paint to get eliminated from the cabinets, and a deglossed cabinet usually needs one or two coats of chemical paint remover.
- Finally, cleanse the cabinet surfaces again using dish soap, water, and a sponge in order to get rid of any leftover paint remover residue.