Caulking is regarded as one of the best ways when it comes to maintaining bathrooms, kitchens, as well as other household areas & keeping them clean and damage-free for a longer period of time. Caulk is mostly used to fill cracks as well as seal joints on every side of the windows, doors, plumbing, siding, and fixtures. This will, in turn, help prevent air, water, dust, or other materials from entering and gaining access to seals, and keeps things tight. Good caulking can make a huge difference betwixt a careless and unsystematic fix or a clean, professional installation. The highly recommended caulk includes
Loctite Polyseamseal Acrylic Caulk With Silicone, which is an exceptional & premium quality acrylic caulk created or prepared methodically with extra silicone for a long-lasting, powerful seal. Some of the best features of this type of caulk includes: sets quickly, easy to apply, and keeps away the moisture, air, dirt, or any other penetrating materials. But over a period of time, even the best quality caulking can get gloomy & dirty or lose its seal. Before moving to a process like installing new fixtures or tiles, it is extremely important to get rid of the existing caulk, which can be a time-consuming process, but worth doing right.
Step By Step Process Of Removing Caulk From A Bathtub
Some of the problems like moisture, soap scum, as well as other such types of build-up, are certain to happen in bathrooms. In order to give new strength or energy to your bathtub’s look, or to install a new one, you will first of all need to get rid of the old caulking. Removing the messy or dirty old caulk can be a difficult job, but doing it the right way will result in a bathtub looking fresh again. In order to get rid of the old caulk from a bathtub, go through the below-mentioned simple steps carefully & achieve the desired result of your work:
- Soften The Caulk: First of all, you will need to soften the caulk, which you can do with the help of a commercial caulk remover. The remover will help diminish the caulk’s inner structure, which, in turn, will make it easier to pry the caulk away. However, you need to know that caulk removers are not inevitably well suited with all materials, so make sure to go through the product manufacturer’s instructions carefully. In these cases, you will need to get rid of the caulk physically.
- Strip The Caulk: After softening the caulk, it is time to strip off the caulk, which can be done with the help of a utility knife or putty knife, cutting through the caulk into sections and stripping it away. As far as the multiple layers of caulk are concerned, needle-nosed pliers will be the best option. Also, caulk removal tools are designed for a special purpose in order to tear away caulk cleanly. The important point to take care of is not to dig too deeply and as a result scratching your tub’s surface. When you are using sharp tools, make sure to take extra safety measures by going slowly, use protective equipment, as well as be safe.
- Clean The Surface: As soon as the caulk is removed, clean the area rigorously in order to make sure that there is no scum or residue left. For the majority of surfaces, brush the area with the help of a cloth dampened with bleach, or a non-ammoniated cleaner, in order to kill mildew. More damage-sensitive coatings may need cleaning with smoother substances like denatured alcohol. When using caulk remover, remember to go through the manufacturer instructions in order to get the details on the best materials as well as methods for cleaning. Allow the surfaces to dry entirely before applying any new caulk.