How To Remove Carpet Glue From Concrete Floor: Cement, Basement, Slab, Pad

General Overview

Removing carpet glue is the tough task and works as a strong adhesive that is required to fix carpet on the concrete floors. The main drawback of this carpet glue is that it leaves the sticky residue that can't be removed using old techniques.

What Steps Are Required To Remove Carpet Glue From Cement Floor?

Here are some easy steps to vanish the carpet glue from the concrete floor like cement:

1. Hot Water: Hot water needs to be filled in the bucket and make sure water must be hot to touch.
2. Create Solution: Take one cup of the liquid detergent and approx 2 cups of the ammonia and add both into the hot water and mix it to create the solution.
3. Scrub: Apply the solution over the concrete cement floor with the help of the scrubber featured with strong and hard bristles and start rubbing the floor with full force to remove the carpet glue till it is gone.
4. Rinse: Once the satisfactory result is achieved just rinse the cement floor with clean water and wipe the floor using mop or towel.

What Are The Ways To Remove Carpet Glue Pad From Slab/Basement?

Here are the ways to remove the carpet glue pad from the basement or slab:

1. Scraping: Use sharp razor edge to scrape down all the carpet glue.
2. Boiling Water: In order to soften the dried glue pour the boiling water on the same let it sit over the glue for one to two minutes till it softens.
3. Scrub: Once the glue is softened scrub it using the concrete scrubber.
4. Glue Remover: Apply the heavy duty glue remover over the slab or basement floor to make the surface clean from the carpet glue but make sure to work around in a well-ventilated area.
5. Sanding: Once done sand the entire floor to make it even.