How To Remove Blinds With Hidden Brackets: Easy Procedure To Get Rid Of Blinds With Hidden Brackets


Easy Procedure To Remove/Get Rid Of The Blinds With The Hidden Brackets

Detaching the blinds is a very easy procedure if the users follow the right techniques. The hidden brackets usually are a simple way to hang down the blinds and that too without having the visible hardware appearance. The hidden brackets are usually fitted within the blind rail. The users can easily remove the blinds with the hidden brackets at home by following the below-described procedure. The material that is used for performing this procedure are hand tools, simply collect the hand tools and start the process.

Procedure

  • Open The Blinds: Start by opening up the blinds so as to forbid it from getting damaged while detaching it. After that, lift the cord downwards till the blinds get raised upward as much as it can then the users need to press it upwards against the metallic bar and the upper cover over the window top.
  • Detach The Top Cover: Then the users need to approach the brackets that hold up the blinds in their place and they need to detach the cover that is placed over the blind top. There is also the broad piece of the plastic that goes over the blind top and if in case the users did not find the cover that wraps the piece of the metal over the blind top then they need to follow the next step. If in case the users find the cover at that place then they are advised to burst it off and then lift it upwards within the bracket surface. The users are advised to be very careful while doing this process as if they lift the cover with the force as it is very fragile in nature and it can break in many small pieces as it cannot handle the pressure. Some of the covers are covered by metal caps and the users need to burst that off by using the flat-headed screwdriver.
  • Find The Brackets: Usually there are various kinds of the blinds available in the market and there is only one single procedure of affixing the blinds at the window top. The users need to keenly observe the blind tops so as to find out the brackets that are holding the blinds in the place. At sometimes there can be the pieces of the metal that will be running at the blind front each one at the distance of the rightmost and the leftmost side of the blind. This kind of brackets can be located easily as it usually holds up the blinds and will get fasten at the front and that is why they can be spotted easily. Other than this the brackets are also placed above the area of the blinds within the small area in between the window top and the blinds affixed with the wall.
  • Burst The Blinds: The users need to use the flat-headed screwdriver and then they need to burst the brackets or the clips that usually holds up the blind in one place. The users need to get assured to hold up the blinds while they are poping the clips if in case they get loosen or they fall downwards. These clips usually help in keeping the blinds in one exact place.
  • Detach The Blinds: Once the users have popped out the brackets from the frame of the window then they need to hold the blind top with both their hands at their ends. Then they need to lift the blinds outwards apart from the frame of the window and by doing so the users can easily detach their blinds. If in case they are not able to detach the blinds then they are advised to examine the window top once again so as to find out the extra brackets that might be placed within the frame of the window and then unhook those brackets by using the flat-headed screwdriver.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved