Step By Step Process & Items Needed To Refinish Or Spray Paint A Cast-Iron Bed
The cast-iron bed can get some of the issues occasionally like it can get dirty, rusty, or discoloration & these issues need to be solved as soon as you notice them. A very few spray paint coats will remodel the bed frame into rejuvenating beauty. In order to make the cast-iron bed look attractive & pleasant, refinishing or spray painting is one of the best options. Gather the required items first & then go through the step by step process mentioned-below to refinish your cast-iron bed:
Items Needed
- Drop Cloth & Wire Brush
- Old Toothbrush & Bucket
- Low-Grit Sandpaper & Mild Detergent
- Soft Sponge, Clean Cloth & Plastic Gloves
- Spray Primer & Spray Paint(Formulated For Iron)
Step By Step Process
- The first & the foremost step is to position the cast-iron bed on a wide-reaching drop cloth, ideally spread on the grass. Make sure to work on a sunny day having little or no wind at all. You, in all likelihood, will have to circle the bed frame with the paint and as a result of it, minimize overspray.
- Now, eliminate any kind of rust from the bed with the help of a wire brush. You can make use of an old toothbrush if in case you have a tiny, narrow, or awkward spaces.
- Next, start the sanding process on the cast-iron bed with the help of low-grit sandpaper. If low-grit sandpaper doesn't work, then you can use medium-grit sandpaper. Handle the tight spots by covering a piece of sandpaper around an old toothbrush and fixing it at the base with the help of a rubber band.
- After that, cleanse the bed frame with warm, sudsy water as well as a soft sponge. Allow it to dry fully in the sun or mop it dry using a clean cloth.
- For safety purposes, make sure to wear plastic gloves. Spread one thin primer coat to the bed. Go from top to base and left to right at a spray distance of nearly 8 to 10 inches. The primer will supply as a bonding agent betwixt the cast iron and the paint to follow, therefore, this step is extremely important. Allow the primer fully dry.
- Now, put on the first spray paint coat to the bed. Keep moving your hand slowly instead of stopping to “force” paint onto one portion of the frame. It is a good idea to apply two light coats of spray paint instead of one heavy coat & the second coat is likely to go on cleanly and easily. Stop spray painting every now & then like at important points to shake the can of spray paint in order to keep the paint flowing.
- Finally, make the paint dry wholly and then spread a second coat. Put on a coat of protective spray varnish, if you desire.