How To Raise The Grain On Wood: Step By Step Process Of Raising The Grain On The Wood


Step By Step Process Of Raising The Grain On The Wood

Staining wood can essentially change its color as well as character, and design or produce any object or surface to meet most tastes. A common method when it comes to applying stain is simply to wipe it on and allow it to sit for a few minutes, before wiping off the excess. In most instances, this method will give you the desired result and is quick as well as relatively simple. However, in some cases, for instance, when you deal with less porous woods like maple or ash, it is important to raise the grain in order to make sure that the wood accepts more of the stain during the application. This is an easy process, you simply need to go through the below-mentioned step-by-step process carefully & achieve the desired result of your work:
  • Sand The Surface To Be Stained
    First of all, you need to sand the surface to be stained using 120 grit or finer sandpaper. Make sure to follow the direction of the wood grain when sanding the surface, due to the fact that the stain will highlight any cross-grain marks.
  • Vacuum The Wood Thoroughly
    Now, vacuum the wood thoroughly in order to get rid of the dust from any cracks and provide a clean work environment. This will help keep dirt as well as other impurities from getting into the stain or finish as you work.
  • Wipe The Wood Down With A Wet Clean Rag
    Next, make a clean rag wet with water, before wiping the wood down with it. While you should take care not to flood the surface, however, don't be afraid to get it wet either. The water will be very helpful in penetrating wood, and cause the grain to raise up as well as open. Allow the wood to fully dry before moving forward.
  • Apply Stain To The Surface
    Use a clean cloth or an applicator in order to apply a stain to the surface. Use a plentiful amount of stain in order to make sure it covers the entire surface. The now-open grain should accept the stain with ease. Allow it to sit for a couple of minutes in order to fully penetrate.
  • Wipe Off Any Excess Stain
    Get rid of any excess stain. When it comes to a large area, make sure to go back into the adjoining sections in order to blend them all together. This will help prevent one area from being darker or lighter than others.
  • Let The Stain Dry Overnight
    Allow the stain to dry overnight, before coating the wood with three layers of finish. Use a brush or other applicator which is entirely dependent on the size of the surface. If the first coat of finish removes or extracts the stain for any reason, give it more drying time before moving forward.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved