Step By Step Process Of Putting Wrapping Paper On A Wall
Wallpaper is a kind of sheet of paper that you can fix to your wall, making it look beautiful & attractive. Wallpaper is not easy to install on the wall & once installed it is hard to remove and it cannot always be painted over, which are some of the serious drawbacks when it comes to installing a wallpaper. Therefore, if you are looking to install wallpaper that can be fixed easily as well as can be removed with ease, then wrapping paper is an excellent alternative, due to the reason that it is very affordable, simple to put up and nearly effortless when it comes to removing it. The heavier the wrapping paper, the more long-lasting or durable it is, however, no wrapping paper will survive for long in a high-traffic area, therefore, it is important to select the area you plan to paper with care. In order to put wrapping paper on a wall, go through the below-mentioned step by step process carefully:
- Measure The Wall: First of all, calculate or compute the wall that you are looking to paper from top to bottom and from side to side. Multiply the length by the width in order to ascertain or establish the amount of wrapping paper that you will need. The majority of wrapping paper labels state the length as well as width, so you can determine how many square feet are on each roll.
- Clean The Wall With Clean Shop Cloth: Now, clean the wall with the help of a clean shop cloth in order to make sure that you don’t trap any dirt or dust behind the wrapping paper. Begin the cleaning process at the top of the wall in a corner. Take hold of the wrapping paper against the top of the wall, making sure to leave an inch or so more at the top than you need. The edge of the wrapping near the corner should be hanging straight. You will need someone to assist you here.
- Staple The Wrapping Paper To The Wall: Next, secure or fix the wrapping paper to the wall, using the staples, no more than 1/8-inch from the ceiling. Place the staples in a way that their length runs parallel to the ceiling.
- Trim Off The Excess Wrapping Paper: Hold the straight-edge right up in opposition to the wall right where it joins or links with the ceiling and trim off the excess wrapping paper with the help of a utility knife. Work slowly and carefully in order to make sure that you don’t tear the wrapping paper.
- Staple The Bottom Of The Wrapping Paper: Position few staples through the vertical length of the wrapping paper not exceeding 1/8-inch from the corner. Staple the underside of the wrapping paper before trimming off the excess using the similar method you used for the top. Continue as long as the area in question is covered, but be careful to match the patterns if your wall space is longer or wider in comparison to the wrapping paper.