Useful Tips Of Preventing Mold Growth In Shower Grout
It's all well and well to clean the grout in your bathroom and shower of mold and mildew, but the truth is that it typically requires a lot of time and work. If you could avoid dealing with it altogether, it would be far more practical. But is that feasible, and is there a way to stop mold from developing in the grout of your shower? By properly ventilating your bathroom and making sure your shower area and tiles are dry after taking a shower, you can avoid mold growth in the grout of your shower. To ensure ample light in your bathroom, it would also be advisable to hang your towels on rods rather than leave them on the floor.
Tip 1: Ensure Ventilation In Your Bathroom
- Moisture is the main cause of mold growth on tiles and grout. The grout in wet places of the house is there because of the propensity of mold to grow on moist surfaces. As an illustration, your bathroom is more likely to produce mushrooms than your bedroom.
- Make sure your bathroom is well ventilated and has sufficient circulation since this is one of the greatest ways to stop mold from growing on the grout in your shower. This airflow will aid in the quicker drying of your tiles and grout, lowering the possibility of mold.
- As soon as you go into the shower if your bathroom has an exhaust fan, turn it on. If not, try finding alternative ventilation methods, such leaving a door or window open. If you choose the latter, keep your bathroom window(s) and door(s) open and unlocked for 15 to 20 minutes following your shower. When not using the shower, keep the door slightly ajar.
Tip 2: Keep The Shower Dry
- Even though we don't expect you to completely dry down your shower after each use, quickly wiping down the tiles and grout with a towel can have a noticeable impact.
- Combining a few of the other strategies mentioned in this post will definitely help you avoid doing this as it can be a headache to do it otherwise. The wet regions must constantly be dried with a squeegee in the event that water overflows and unintentionally leaks outside the shower area or creates puddles of water.
Tip 3: Seal Your Shower Grout
- Your grout will stay dry even when there is wetness in the shower if you apply sealant to it. By slowing down the rate at which water penetrates into the grout, it gives you more time to dry up your shower area or let it dry naturally.
- Grout sealing should ideally be done at least once a year. In addition to protecting your grout from mold, sealing it will also stop the formation of mildew and other bacteria.
Tip 4: Clean Up Soap Scum In Your Shower
- Mold, or more properly, fungi, are living things. It requires food to develop and thrive, just like other living things do.
- The organic fibers in clothing are a typical food supply for mold in a shower, as was already noted. The soaps and lotions that are often kept in the bathroom provide another source, though.
- Unlike bar soaps and soap scum, most individuals don't keep their soaps and creams covered. If you use bar soaps, keep them sealed while not in use by storing them in tins. Also, remove any soap scum that has accumulated in your bathroom.
Tip 5: Remove Moisture Sources From Your Shower
- By definition, the bathroom and shower are moist rooms in your house. To lessen the wetness in the area while it is not in use, there are particular actions you can do.
- Fix any leaky fixtures in your bathroom, in particular. Water leaks can make your grout more wet, and you won't be able to constantly dry the water off like you can after taking a shower. Fixing the fixtures will cut down on both the work and the possibility of mold growth.
Tip 6: Use Shower Curtains And Liners That Are Easy To Clean
- Use easy-to-clean shower curtains and liners to keep your bathrooms looking their best all the time. After taking a shower, be sure to shake off the majority of the water from the curtain and keep it partially drawn so that it can dry more quickly while not obstructing airflow in the restroom.
Tip 7: Let In The Light
- Although most mold thrives in the presence or absence of light, light can sluggish mold growth. Some mold species actually perish when exposed to sunshine.
- In particular, sunlight can harm the mold's cells, stopping them from performing as they need to. Make sure your shower area receives as much sunlight as you can, if you can. Additionally, this will hasten the bathroom's and shower's normal drying process!
Tip 8: Use A Mold-Prohibiting Spray
- At least once each week, apply a mold-preventing solution to the bathroom's tiles and caulking. To create a natural anti-mold treatment that will guard your bathroom against fungi, simply combine equal volumes of white vinegar and water in a spray bottle (or add 10 drops of tea tree oil to a spray bottle filled with water).