Easy Steps Of Polishing Stainless Steel Sink To A Mirror Finish
If you have a stainless steel sink but its surface is dull and unfinished and you need to restore its shine in an old way then you just need to follow the given steps carefully and make it look shiny again:
- First of all, choose a moderate abrasive. The abrasives can scratch your steel sink's finish, so you just need to use them only for an infrequent restoration project, or in order to remove any stubborn stains. You need to try stainless steel polish, whiting, talc, or the baking soda. Apply one of these solutions to your slightly damp cloth.
- You just need to rub in the direction of your finish lines. Most of the stainless steel sinks have a brushed finish. You need to wipe parallel to your brush lines to diminish the chance of any visible scratch.
- Rinse your stainless steel cleanser off. Simply wash your cleanser off far and wide you used it. If your steel sink's shine is restored, dry your sink wholly with your clean towel, dabbing rather of rubbing to avert the streak marks.
- Then you need to wipe away any hard water spots and rust with the help of vinegar. If your steel sink is clean but covered in the dull white spots then you just need to dip your soft cloth in the white vinegar and then you need to wipe them away. This will also work on the rust spots.
- You can also buff with flour if your sink is still grimy. Flour is very cheap & very mild abrasive, which makes it a good choice for cleaning any large area. If your steel sink still looks dirty and you have some spare time then you just need to dry your sink thoroughly. Any water left on your surface will turn the flour into the glue. You just need to sprinkle a light dusting of flour over your steel sink. Use about 1/4 cup (60mL) flour for your average kitchen sink.
- Contemplate buffing with olive oil. Olive oil can also boost the shine and will remove streaks from your steel sink, but overestimate it can leave your stainless steel sticky or ultimately make the presence sluggish than before. If you try it, put just 2-3 drops of olive oil onto your soft cloth. Wipe your dry steel sink constantly until your entire surface is coated very delicately. Buff in the small circles with your same oiled cloth for a couple of minutes until you have achieved an even shine for your steel sink.
- Keep the sink dry for 24 hours if feasible. A major clean can leave the surface of your sink temporarily damaged, especially if there was rust on the surface. Give the steel a day to restore its protective anti-rust layer, or at least dry it thoroughly after each use during this time.