How To Polish Acrylic Bathtub: Best Ways Of Polishing Acrylic Bathtub
Best Ways Of Polishing The Acrylic BathtubThe bathtubs can develop scratches as well as the marks with the span of time. These scratches will get filled with the dirt and the debris particles that make the bathtub look very dirty. For that polish the scratches to remove the dirt as well as restore the look of the acrylic bathtub, but it is advisable to use the right cleaners and work carefully. The best ways for polishing the acrylic bathtub are mentioned below:
Way 1: Baking SodaBaking soda is known as the antibacterial cleaning powder that is all-natural as well as is non-toxic. The baking soda is a mildly abrasive material that can be used to polish the small scratches in acrylic bathtubs. In order to use it, mix enough water with the baking soda to form a thick paste. Apply the paste on the scratches on the bathtub to remove it. Rinse the acrylic bathtub with the help of clean water once finished. This usually works only on superficial scratches.
Way 2: Lemon Juice & BoraxThe borax is another type of natural cleaning powder, but it is important to remember that it is toxic if ingested. Prepare a paste using the borax to remove out all the small scratches on a bathtub. In order to do this, simply add enough lemon juice to the borax to creating a thick paste and after that rub, the paste on to the scratches keep rubbing until they are gone. The acid that is in the lemon juice will help to remove the alkaline soap scum deposits in the scratches. This option works only on superficial scratches.
Way 3: Commercial ProductsUse commercial polishers, the polisher contains the mild abrasives that will remove hairline cracks as well as the scratches without damaging the bathtub. Choose a product and then test it on a small hidden area of the bathtub to ensure there is no negative effect like it does not change the color or texture of the bathtub. These also work on superficial scratches.
Way 4: SandingSanding the acrylic bathtub using a fine-grit sanding accessory attached to a rotary tool will help to remove the deeper nicks and the scratches. The user can also use fine-grit sandpaper to keep sanding until all the nicks and the scratches are gone and finally complete the job with the help of a buffing wheel to restore the shine.
Way 5: Car WaxIn order to finish polishing an acrylic bathtub, apply the car wax to make it shine and also protect it from the further future stains and the scratches. To use it, simply apply a very thin layer of the wax to the bathtub using a clean cloth. Keep applying until the entire bathtub is covered with the wax. Buff out the excess wax with the help of clean cloth in circular motions, or simply use a buffing accessory attached on a rotary tool.