Easiest Way Of Painting Wood Sliding Glass Door Frame
Apply a new coat of paint to your old wood sliding glass door frame if the paint is damaged or faded. Painting your sliding glass door frame is a much more affordable option than replacing it, and it doesn't call for any specialized knowledge or equipment. It is a great option to update an old, dated-looking sliding glass door frame or to change the color to go with your current décor.
- Lift The Door & Pull The Bottom Out
First of all, grab both sides of the insect screen and slide it to the center of the door frame. Pull the screen out from the bottom by lifting up. To lower the door's wheels, find the screw on the bottom edge of the sliding door, affix a screwdriver, and counterclockwise turn it. Pull the bottom out after raising the door. - Slide The Door To The Center Of The Frame
The fixed door must be moved to the center of the frame by removing all screws keeping it in place. Pull the door out from the bottom by lifting it up. Using 120-grit sandpaper, sand the wood surfaces of the doors. Use a dry towel to wipe away the sanding dust. - Cover The Wood Surfaces With Primer
With a paintbrush, cover the wood surfaces with primer; let it cure overnight. Utilize a paintbrush to apply latex or oil-based paint. Never paint silicone or glass. Allow the paint to completely dry. Finish with a layer of lacquer, varnish, or polyurethane. Allow it to totally dry. - Place The Fixed Door In The Frame's Center
Place the fixed door in the frame's center and tuck the top of it inside the frame. Slide the door over into the right position by pushing the bottom of the door into the frame. To fasten the door, replace all of the screws. - Push The Bottom Of The Door In
Slide the sliding door's top into the frame and then push the bottom of the door in. To relieve pressure on the wheels, use the edge of a chisel beneath the door. To elevate the wheels or lower them, insert a screwdriver into the adjustment hole towards the bottom and turn it in either direction. Adapt as necessary. To test the door, take the chisel out and slide it back and forth. Place the bug screen in the frame's middle. Push the bottom into the track after inserting the top into the frame.