What Are The Steps To Stain Particle Board Cabinets/Furniture Without Sanding
Here are some of the steps by which the customers can easily stain their Particle Board Cabinets without Sanding:
1.
Gather All The Tools And Materials: The customers need to start by collecting all the tool and the material they require during this procedure like:
- Grease-cutting cleaner.
- Sponge.
- Soft Cloth.
- Liquid Deglosser.
- Paintbrush, paint roller.
- Screwdriver, tape.
- Spray paint, White paint.
2.
Clean The Cabinets: The customers need to apply the grease-cutting cleaner to the cabinets by using the sponge in order to clean all the dust and the debris particles accordingly.
3.
Use The Liquid Deglosser: The customers then need to use the Liquid Deglosser and then pour a small amount of it to the soft cloth. They then need to use the damp cloth and rub it over the entire surface of the cabinets in round motions.
4.
Remove Hardware: The customers then need to detach all the hinges and other metal hardware items from the kitchen cabinets by using the screwdriver.
5.
Clean The Inside Areas Of The Cabinets: Once the customers detached all the hardware from the kitchen cabinets they then need to detach the insides shelves and the doors of the cabinets and then clean them by using a soft damp cloth.
6.
Stain The Back: The customers then need to place the cabinet doors on a flat surface to its backside up and the customers then need to apply a layer of the enamel paint over the entire surface of the doors by using the paint roller.
7.
Stain The Molding: The customers then need to use the tiny paintbrush in order to apply the stain to the curved areas of the cabinet doors.
8.
Stain The Front Side: The customers then need to stain the front sides of the door and then let the cabinet doors to dry completely. Once the paint is dried completely the customers then need to add more coats of the enamel paint.
9.
Stain The Shelves: The customers then need to apply the same procedure while painting the shelves of the kitchen cabinets and then allow them to dry completely in the open air. The customers then need to apply the spray paint to the metal hardware as well.
10.
Re-attach The Doors: Once the paint is completely dried the customers then need to re-attach the cabinet doors by using the saved hinges and screws.