Proper Procedure Of Painting Over Sponge Painted Walls
The sponge painting method necessitates designing a color contrast betwixt the base coat and the sponged-on paint. The end results can also put together an uneven finish. The contradictory & differing colors can be difficult & complicated to cover up with a new paint job, particularly, if you are selecting a lighter color than what is currently on the walls. In order to achieve the desired appearance, sand the walls to counterbalance the surface if necessary and then prime it accurately before applying the paint. To paint over sponge-painted walls, go through the below-mentioned simple steps carefully & achieve the desired result of your work:
- Protect The Floor & Furniture: First of all, protect the floor as well as furniture with the help of drop cloths. Take out the paintings and other hanging items from the wall. Disconnect the switch plates as well as outlet covers and set them aside. Cover any hardware that is difficult to remove, & any other surfaces that you don't want to be painted, using masking tape.
- 120-grit Sandpaper: Secure & affix 120-grit sandpaper to a pole sander when a thick or textured paint has made your surface look uneven. Move the sander in-and-out and up-and-down across the wall, commencing from the top and all the way to the floor. Apply medium force over the wall's surface in order to produce an even finish.
- Remove Paint Drips: Now, get rid of any remaining bumps or hardened paint drips with the help of a scraper, or sand those discoloration or deformity by hand using 120-grit sandpaper.
- Course-grit Sanding Sponge: Moistetn & wet a course-grit sanding sponge in a bucket of warm water and wear away the wall's surface. Rinse the sponge as needed, and follow up with the help of a dampened fine-grit sanding sponge.
- Clean The Wall: Vacuum the wall with the help of a wand attachment to remove all the dust. Clean the wall using a sponge dipped in warm, soapy water. Pay special attention to any oily or waxy spots. Wash the wall one final time using another sponge dipped in clean water. Permit the wall to dry entirely.
- Primer: Now, it is time to paint nearly two coats of primer onto the wall and allow the primer to dry for the time that is specified in the instructions. Apply extra coats of primer, if needed.
- Paint: Finally, start painting the walls. Cut in the corners of the walls as well as edges using a paintbrush. Paint the middle of the walls using a roller in large "V" formations in order to minimize streaks. Go through the paint can's instructions for suitable drying time in betwixt each coat.