Easy Process Of Painting Over Glazed Kitchen Cabinets
If you are looking to paint over a glazed kitchen cabinet, you need to properly prepare for the project, otherwise, this process can be a difficult task to perform. As the majority of people know, paint does not usually stick to the glaze, therefore, it is important that you remove the glaze first. After removing the glaze from the cabinet, you can apply a good primer coat, along with the high gloss paint. This is a task that the majority of people can accomplish without hiring a professional, unless & until they are willing to put a little time as well as effort into the project.
Thing's You Will Need
- Power Palm Sander
- Cotton Rag
- High Gloss Paint
- Small Roller
- Screwdriver
- Fine Grit Sandpaper
- Good Quality Primer
- Paint Brush
- Small Roller Pan
Step 1: Remove The Hardware
First of all, pull out all the hardware with the help of a screwdriver. The handles, as well as hinges, have to be taken out in order to maintain their original appearance. If you will take the option of Taping them off, it will not properly safeguard the hardware against paint splatter.
Step 2: Sanding
Using a power palm sander with the help of fine-grit paper, you need to sand the entire cabinet, both inside as well as outside. You must get rid of the glaze entirely. There is no need to sand all the way down to bare wood. Unless & until the glaze is completely gone, the primer will stick. When sanding around the edges as well as corners, it is important that you move slowly and sand them well. If you are not able to do so, the corners will not match with the rest of the cabinet. A sanding block may be very helpful when it comes to achieving the desired results. Wear a face mask as well as safety glasses while sanding in order to avoid getting any particles into your eyes or lungs.
Step 3: Cleaning
Use a clean cotton rag when it comes to wiping away the dust particles. You can also use a damp rag easily, but it is important to allow time for the cabinet to dry before you try to apply primer or paint. If the cabinet is still damp while applying primer or paint, then it is possible that it will bubble and crack. The outcome will be the peeling paint.
Step 4: Apply Primer
After sanding as well as cleaning the previously glazed kitchen cabinets, you can now apply the primer coat. Use a brush in order to cut in the corners as well as edges, before using a small roller in order to create a uniform finish. The majority of the people mistakenly think that a primer coat has to be solid, such as a paint. But actually, the primer coat is simply a way to make sure that the paint sticks to the cabinet. Unless & until the primer is applied to all the areas of the cabinet, it will successfully do its job. Do not worry if the primer coat does not actually coat the surface, due to the reason that it is not designed to do so.
Step 5: Apply Paint
Apply the high gloss paint in exactly the same way as you applied the primer. Use the brush when it comes to cutting-in portion, then a small roller in order to complete the work. If you are looking for a brush look, then you can apply the paint using the brush to achieve it. Allow the first coat to dry before applying another coat. Some specific colors may even need a third coat, therefore, it is important to pay full attention to how the paint coats the surface and use your own judgment. You will get an idea yourself whether the two coats will work or you need another coat. Before applying primer or paint, it is important to go through the instructions on the can and check that your work area is well-ventilated.