Step By Step Process Of Painting A Cedar Fence
If you are looking to enhance or improve the appearance of your home, then Cedar fences can be the best option. It can be perfect for those homeowners who don't like the artificial appearance of vinyl as it gives the natural look to your home. Cedar's comparatively low cost makes it the best choice for homeowners who are on a low budget. However, untreated cedar fences have a tendency to turn gray with the passage of time and can even warp or rot because of years of long-lasting varying weather. The majority of the people opt to paint their cedar fences in order to improve their appearance as well as safeguard them from the elements. Many people have a cedar fence on every side of their house that could use some sprucing up. One of the best ways to do this is to apply new paint to it. In order to paint a cedar fence, gather the certain items required for the process & then go through the below-mentioned simple steps carefully to enhance the appearance of your cedar fence.
Thing's You Will Need
- Pressure Washer
- Scrub Brush
- Paint & Tarp
- Tape Measure
Step 1: Measure The Fence
First of all, you need to take the approximate measurement of the cedar fence with the help of a tape measure. You can multiply the length times the width in order to get the square footage of the fence you are looking to paint, which in turn will help you to know the exact quantity of the paint that you need to purchase. However, you can also get a little bit of extra paint, to be on the safer side. That way, if you need to do some touching up, then you will not have to try to complement or tone with the color.
Step 2: Clean The Fence
Before you start painting a cedar fence, it is always better to clean the fence first. Except if it is a brand-new fence, there should be some residue as well as unsightly build-up on it. In most of the cases, you will need to use a pressure washer to perform this task. When you are using the pressure washer, put detergent in the area that absorbs or saturates water for the pressure washer. By using detergent, you will be able to break up some of that build-up with ease. When it comes to stubborn areas, take a scrub brush and clean part of the fence using your hand. After washing the fence, allow it to dry for a few hours before starting to paint a cedar fence.
Step 3: Prime The Fence
After cleaning the cedar fence surface, you will need to prime the surface before you finally start to paint a cedar fence. Cedar has natural oils in it that eventuate periodically. If you ignore the use of a primer and seal these oils into the wood, then they are going to eventuate through the paint and your job will not look good. You need to purchase a primer that is specially designed for this purpose. Make sure that you are purchasing the right type of primer that will go over cedar well. As soon as you have the right primer, apply it to the cedar fence, with the help of a paintbrush. After applying one coat of primer, allow it to dry completely before moving to the final step, i.e, painting.
Step 4: Paint The Fence
After you have primed the fence using the correct type of primer, you can start painting. With the help of a paintbrush or a paint roller, you can apply the paint all over the fence. You need to apply at least two coats in order to make sure everything looks good. After applying the first coat of paint, allow it to dry, before applying the second coat of paint.