How To Paint A Banister Without Sanding: 5 Easy Steps To Stain A Banister Without Sanding

5 Easy Steps To Stain A Banister Or Stair Railings Without Sanding

Banister, also known as stair railings, is considered one of the best accent pieces in your homes that will make the interior portion of your homes look beautiful & attractive. If you feel that your banister is looking old as well as weathered, it will have an adverse effect on the interior design of your homes. As soon as your banister or stair railing gets old, you need to paint or stain it immediately in order to make it look attractive all the time. Sanding your banister will be very frightening & will make your painting process messy, so you can paint your banister without sanding as well. In order to paint or stain a banister without sanding, go through the below-mentioned steps carefully & achieve the desired result of your work:

Step 1: Protect The Area Around The Banister

The first and the foremost step is to protect the working area, due to the reason that if the stain touches anything, it is going to mark. So, as soon as your start staining your banister, you need to make sure that the stain only gets on the banister. Lay down tarps or newspaper and tape off the areas that you are going to stain. Another important point to remember is to keep the windows open, as the stain will have a strong smell, so you need to ensure that your working area should be well-ventilated. Also, you need to use a pair of gloves at the time of applying chemicals in order to protect your hands from harmful substances.

Step 2: Apply Liquid Deglosser

The next step is to prepare your banister for the staining process. Here, you would generally sand down your banister. In order to make the staining process easier, you can buy a liquid deglosser or liquid sander, which will help get rid of the glossy layer from the wood. The main purpose of a liquid deglosser is not to strip the wood, instead to get rid of the glossy shine and create a smooth surface that isn’t greasy. As soon as you finish this step, remember to use the deglosser underneath the banister or stair railing as well.

Step 3: Choosing A Stain

There is a huge range of options when it comes to choosing a stain for your banister or stair railing. One of the best stains that you can use on a banister includes gel stain due to the reason that it doesn’t need heavy sanding as compared to the other conventional stains. While gel stain is much thicker when you compare it with the conventional stain, it doesn’t entirely cover the natural beauty of the wood.

Step 4: Applying A Gel Stain

In order to apply a gel stain on a banister, you need to have a thin cloth or foam brush. You can also apply a thick layer of gel stain to your banister. However, you need to make sure that the coat is not so thick that it drops down the railing. These drops will dry this way and in turn, there will be an uneven surface to your stair railing. Usually, a single coat of gel stain is not enough, which doesn't mean that you need to apply new layers immediately, though. To put or spread extra coats, wait as long as the stain is dry before additional application. This drying process can take at least 24 hours, so you need to be very patient. If in case you apply an additional coat too early, it can result in a botched stain job.

Step 5: Apply A Stain Sealer

As soon as the final stain is completely dry, you can add a finish in order to seal the stain in. One of the best stain sealers for banister or stair railings is a polyacrylic finish, which will give exceptional results after applying it. Finally, you are done with the staining process & now your banister will look beautiful and attractive as usual.