Steps To Oil Outdoor Teak Wood Furniture
In order to oil Outdoor Teak Wood Furniture, the user needs to follow certain steps mentioned below:
- Sand: The first step in oiling the wood furniture is sanding with the help of the extra fine 220 grit sandpaper. It is better to sand in the direction of the grains. Once the sanding is completed then wipe the area with the cloth.
- Apply: Now apply the small amount of the oil on the surface but in small sections.
- Rub: With the help of the clean cloth rub the oil on the surface, rub the oil in the direction of the grain of the wood. In order to work the oil well into the wood rub hard. Continue the process until all the wood furniture surface is covered.
- Stay: The next step is to let the oil stay on the wooden surface for about 30 minutes. After that remove the oil from the wood with the help of a dry cloth. Left the furniture as it is for about 24 hours.
- Sanding: Now the next step is to sand the area simply pour a small amount of the oil on the piece of 600 to 800 grit sandpaper. Then gently work the oil on the surface with the help of the sandpaper, this step will help to push the oil deep in the pores and will enhance the beauty of the wood's natural grain.
- Repeat: Repeat the process until all the area is covered with the oil using the sandpaper, then Wipe off any remaining or excess oil from the wood with a dry cloth. Allow the furniture to stand for 24 hours.