How To Measure A Chair For A Slipcover: Measuring Guide For A Chair Slipcover

Measuring Guide For A Chair Slipcover

By making your own slipcover, you can achieve a customized look, modernize your furniture, match your new décor, or simply save an old, comfortable chair. However, you must first determine how much fabric you will require before you can start sewing. By taking the proper dimensions, you can avoid wasting money on extra fabric and avoid making the much more expensive error of not buying enough material and having to restart the project from scratch.

Step 1: Measure The Seat Cushion

If there is a seat cushion, take it off. The seat cushion's dimensions. The cushion's width, length, and height are all included in these three dimensions. For the total size of the cushion, add three inches to each of the measurements for the seat cushions.

Step 2: Measure The Seat Base

Calculate Or compute the seat base's dimensions. Depending on whether the chair has a cushion, this is either where the cushion sits or the seat of the chair. Take the breadth and the length into consideration. Both seat base measurements should be multiplied by 5 inches.

Step 3: Add Three Inches To Each Back Cushion Measurement

Add three inches to the height of the chair measured from the seat's base to the floor. If there is a back cushion, take it out. The back cushion's dimensions. The cushion's breadth, length, and thickness are all three dimensions included in this. Each back cushion measurement should be increased by three inches before adding the three dimensions together.

Step 4: Take A Measurement Of The Chair's Interior Back

Take a measurement of the chair's interior back. This is measured both from side to side and from the top to the base of the seat. The chair's back measures should be multiplied by three inches, then added together. From top to bottom and side to side, measure the back of the chair at its most extreme point. Each measurement taken from the chair's back should be increased by three inches before being added together.

Step 5: Measure The Arms

Size up the arms. The distance from the back of the chair to the floor, passing over the edge of the arm, is the first measurement. The second measurement is taken from the bottom of the seat, up the arm, and down to the floor.

Step 6: Add The Two Arm Measurements Together

Eight inches should be added after adding the two arm measures together. Divide this sum by two. Total the results of the measures taken above. By 36, divide the total. The amount of yards required to cover the chair is this sum.