How To Make Wood Shelves: Step By Step Process Of Making Wood Shelves

Step By Step Process Of Making Wood Shelves

Building your own wooden shelves for storage or organization will save you enough money but more importantly, it will allow you to design & build the shelf that will fit your exact need & space. You might want to use your wooden shelf parts available from a home center, or you can also cut & build everything from scratch. If you want to finish this task by yourself then you just need to go through the below-mentioned step by step process:

Step 1: Design Considerations

The size of your objects means length, width & height that you want to store & their weight is the 2 main design examination. Large & heavy objects need large shelves that are made from the strong building materials and small or light objects need less support. Access is a 3rd deliberation. Large, heavy, or bulky items should apparently store near the floor and not your ceiling.

Step 2: Brackets

The angle brackets fasten precisely to wall studs with the help of screws & come with or without the diagonal supports. Two or more brackets screwed to your wall will support a board laid across the top. Installation with the store-bought metal brackets will take as little as 5 minutes only. You can make your own angle brackets from scrap 3/4-inch-thick plywood & lumber. The plywood square cut in half and will make the diagonal support. The 2 pieces of 1-by-3 lumber glued & screwed to the back & top complete your angle-bracket support.

Step 3: Floating Shelf

The floating shelves materialize to hold themselves up without any visible support. They are also better for lightweight items but the lack of support underneath keeps your space clear. The 24-inch-wide hollow door cut in half makes construction easy. A 2-by-2 or 2-by-4 cleat fastens to your wall studs with long screws or lag bolts. For a 2/4 cleat, the minimum screw length should be 5 1/2 to 6 inches. Glue applied to the inside of your door panels along with the edges holds your shelf to the cleat. Temporary support will hold your shelf level while the glue cures.

Step 4: Heavy Duty

When you have a lot of things to store or the items are heavy then you need to turn to 2-by-4s & 3/4-inch-thick plywood. The rectangular shelf frames made from 2/4s have cross supports betwixt your front & back in every 16 inches. The plywood is screwed to the top of your frames. The shelves fasten to 2/4 legs placed at each corner in order to make a stack of shelves. The shelves fasten to your wall studs for the permanent storage or 1/4-inch-thick plywood fastened to the sides & back stabilize a moveable unit without fastening it to your wall.