How To Make Ping Pong Paddle Sticky: Ultimate & Best Ways Of Making Ping Pong Paddle Sticky

Ultimate & Best Ways Of Making Ping Pong Paddle Sticky

Before starting the process of making the ping pong table sticky, the first and foremost thing to do is to determine the current stickiness of the paddle rubbers. You can do it by placing a paper sheet & then stick the paddle to this paper sheet. If in case it sticks to the paper & while the paper is still attached & you can move the paddle around, then it becomes clear that it has an excellent stickiness. Now if you want to make the ping pong paddle more sticky, then some of the ways are mentioned below:

Clean The Ping Pong Paddle

Cleaning the paddle means that you have to get rid of all the dirt & dust that will be present on the paddle due to which the bat becomes sticky as well as enhances its adhesion. There are various ways of cleaning your paddle like using shaving foam as well as a soft piece of cloth in order to clean it smoothly. Another way is to use water, but here you need to make sure that the cloth is not too wet, instead should be slightly wet, otherwise much water can damage the rubber on the paddle.

Using Butterfly Foam

In this method, you need to press to spray a small quantity of white foam & then stain it on the ping pong paddle surface. As soon as the foam vanishes from the paddle surface, the rubber of the paddle becomes more sticky as well as glossy. However, you need to make sure not to apply these kinds of unpredictable agents on the paddle surface time and again as using it regularly will damage the rubber of the paddle.

Using Boosters

Another way to use on the paddle rubber is by using boosters that will help make the paddle more sticky. One of the best boosters that are recommended to use on the paddle rubbers includes Dandoy Bio-Booster. Firstly, with the help of a brush, you need to apply the glue equally across the rubber. After applying glue, give it some time, nearly 12 to 24 hours, to dry completely. In order to make the rubber speedy, you can apply another layer of glue on the paddle rubber.

Using Oils

This is the most productive method in order to adjust the rubbers, make them sticky & increase its life span. First of all, get rid of the rubber shielding foil from your rubber. Before starting to apply oil, first, you need to clean your paddle. Then get any kind of oil from your kitchen & the types of oils may include veggie oil, olive oil, etc. But in order to increase the stickiness of the rubber, it is particularly recommended to use sunflower oil. Rinse a medium-size brush completely into the oil and rub your rubber with it. Wait for nearly about 30 minutes before doing it 3 to 5 times more. After this, you will notice an excellent stickiness to the paddle rubbers.

Using Protective Film

After getting rid of the stains, making the water completely dry & eliminating the dust from the paddle rubber, it is the time to use the protective film. It is advised to purchase some thick film to stick since it is very difficult to warp the film. The extensive film will be much larger than the rubber surface, so you need to cut it after purchasing. It is highly recommended to cut it moderately smaller than the rubber surface so that it will be easier to stick flat and does not need to be intentionally positioned. The film is mostly attached from the bottom. From the base end of the film, steadily force it with the glue stick to prevent air bubbles or swell. Always make sure to position the plastic protective film back on after every use.

Using Tackiness Sprays

Spinmax is one of the exceptional sprays that can be used to restore & add stickiness to the ping pong paddle. This method is very easy as you just need to tremble the bottle, position it & start spraying on the surface of the paddle rubber. Dryness time is near about 20 minutes, but for a perfect result, wait for 24 hours in order to maintain your rubber and remarkably increase its lifespan.