4 Easy Steps For Making Chairs Using Old Tires
The most important reason for using tires to make furniture is to help the environment by recycling waste material that will not degrade in the environment. Rubber tires have a very high recovery rate due to the ease of recycling them when the user will get new tires for the car. Below the user can find the step-by-step process on how to make a tire chair from old tires. There are only a few simple steps that will make a fun, spunky, and unique chair and will catch people's attention. The user can use this chair in the yard, bedroom, as well as for watching a sports game. The steps are mentioned below:
- Drill Holes: The first step is to drill holes, it depends on the size of the tire for the number of holes, usually, the 16 holes are sufficient. It's very important that these holes must be parallel with each other and should be straight so that when the user begins the weaving process, it is straight and comes out looking good.
- Painting: Once the drilling is done, now the user has to move on to painting the tire. The user can go with bright colors as it works and looks best. Nobody will look at the bottom of the tire so it is necessary to flip it over in order to paint it. The paint is also not important, it's only applied to make the tire look nice. The user can use the spray paint to paint the tire, apply the three coats but let the first coat dry before applying another coat, the darker the user wants the paint on, the more paint they should use.
- Weave: The user needs to make sure to have enough rope to complete the weave. The tighter the user wants the weave the harder they should be going to pull the rope. At the end of the weaving, the user can always go back to pull it tighter.
- Raise The Height: After the user has completed the weaving process, they can easily stack the chairs to make them taller or use them individually. It can be taken anywhere and can be enjoyed by everyone.