Easy Steps To Make An Ottoman From Scratch
In order to make an Ottoman from scratch, the user needs to follow the steps mentioned below:
- Cut: The first step is to cut the piece of the Scratch wood and foam of about 2 inches. The user can also use the coffee table that makes this even easier. Simply drill the holes through the table to add button tufts.
- Contact Cement: The next step is to Cover the wood top with 2 inch foam on top using contact cement.
- Extra Batting: In order to secure the underneath batting Cover the top with extra batting with the help of staple gun and Trim the excess.
- Fabric: The next step is to cover the batting with the fabric, simply staple the fabric in the middle of the table, please make sure that it is not too tight, do the same trick for the other sides as well. The user needs to make sure that there is not bunches and bulges.
- Corners: For the corners, simply pull the left flap on the right and then staple, after that pull both flaps on the left side and staple. Finish all the four corners.
- Button And Cover Kits: The button and the cover kits can be easily found at the local store. After that cover the button with the same fabric following the kit instruction.
- Thread The Buttons: In order to thread the button, Use a very large needle and then string a strong thread, don't cut the thread. Now push the needle with the thread through holes from the back side, then simply String the button onto the thread.
- Washer: In order to make sure that nothing looses then use a washer at one end of the string.