Step By Step Process Of Making Tabletop From Hollow Core Doors
Hollow-core doors are regarded as one of the best, sturdy, widely available as well as relatively economical kind of doors, which as a result makes them a frequent choice when it comes to a variety of home projects, including tabletops. Entirely dependent on the size, legs as well as the construction you choose, you can easily use a hollow-core door in order to make different kinds of furniture items such as a desk top, coffee table or dining table. In spite of the fact that the height may vary, but the building of a table from a hollow-core door is the same. Go through the below-mentioned step by step process carefully if you are looking to make a tabletop from hollow core doors:
- Measure Your Door: First of all, calculate or compute your door before marking the desired position for the mounting plates. Make sure not to allow more than a 12-inch overhang on each end of the door and not more than 8 inches on the sides. Place the mounting plate markings uniformly & equally on the door.
- Drill Pilot Holes For The Molly Bolts: The next step is to drill pilot holes for the molly bolts on the door, before enlarging the size of the holes in order to match the molly bolts. Tap the molly bolt anchors into place with the help of a hammer before screwing the bolts into place to expand the anchors.
- Screw All 4 Leg Mounting Plates Into Position: Now, remove the bolts before placing the mounting plates for the legs into position on the table, lining them up using the anchors already positioned. Screw all four leg mounting plates into place.
- Install The Legs, Screwing Them Into The Mounting Plates: Next, install the legs, & fix them into the mounting plates using the screws. Paint or finish your new table, as you want. You can choose either to paint or stain your table before assembling it, however, it may be extremely easy to paint after assembly.
- Top Your New Table With A Piece Of Bevel-cut Glass: Finally, top your new table using a piece of bevel-cut glass. This is optional when it comes to a flat door, however, essential for one having a molded or uneven surface. The weight will take hold of the glass in place, there is no need for extra mounting supplies.