Two Easy Parts & Steps To Build Standing Desk
By working on the standing desks relives the spine stress of the users and it also promotes good posture. Building the standing desk is not that much difficult for the users as all they have to do is to gather the required materials and then follow the below-described procedure:
Required Materials:1. Desktop
2. Pencil
3. Materials for legs or base
4. Level
5. Screws
6. Adjustable joint
7. Measuring tape
8. T-square and
9. Elevated surface as well
Part I- Taking The Measurenments
- Self Measurement: The users need to start by measuring themselves as the good standing desk is the one that will get perfectly suited with their height. Then they need to note down their self measurements.
- Stand Straight: Then they need to stand straight as they should not slouch while they are working on the standing desk and that is why they are advised not to slouch while taking the own measurements.
- Elbow Positions: Then they need to note down their elbow positions as the desktop should be placed at the right height so as the users can easily rest their elbows over them. This is very important for those people who have to use the mouse while using the laptop or the computer or to those persons who have to do painting or the writing sessions. The small low or the higher is absolutely fine as long as the users won't forcefully lower their arms so as to work comfortably.
- Place The Chair: The users are also advised to place the chair near the standing desk as it won't be possible for the users to stand nonstop all day long as it can cause a strain in their back.
Part II- Building The Standing Desk
- Purchase Material: Start by purchasing the materials that they require while building the standing desk like lumber pieces, desktop, measuring tools and adjusting tools as well.
- Set Up The Base: Then they need to set up the base as per the taken measurements and purchase those materials that will be used for the legs. If the users choose to use the metal pipes for building the base then they are advised to re-check the thickness and the height before using them. Then they need to use the measuring tape, level, and T-square in order to be assured that the standing desks specifications are precise.
- Affix The Legs: Then they need to affix the legs to the base of the desktop and the base needs to be flat and wide as well as to let the taller desks stand properly without leaning or the wobbling. For the wooden legs, the users need to use the wood screws to fasten the legs and to secure the metal legs they need to bolt them in their desired places for increasing the stability.
- Adjust: Then finally they need to make the desk a bit adjustable and to do so they can add the clamping joints at the legs of the desk that can allow them to adjust the height of the table.