What Are Thre Steps To Build A Solid Oak Wood Table Top?
The best way to build a Solid Oak wood Table Top is mentioned below:
- Lay: First of all lay the table top planks side by side, on the flat even surface.
- Holes: Now drill the pocket holes from the outer side of the boards going to the inner board side, in order to make the drilling easy use the pocket hole jig. It minimizes the chances of drilling all the way throughout the wood.
- Attach: Once the holes are completed, now attach the boards together with screws. The best way to use the screw is to use the power drill that will push the screws all the way into the pocket holes.
- Aprons: Now trace the position of the aprons on the underside of the table, the apron prevents the tabletop and leg from moving, simply from the edge of the tabletop draw a line to indicate where the aprons will be installed.
- Clamp And Glue: At last Clamp and glue the aprons to the tabletop. Simply set the aprons on the traced lines and glue to the table.