How To Make A Dull Acrylic Bathtub Shine: Step By Step Procedure To Clean Acrylic Bathtub


Step By Step Procedure And Items Required To Clean A Dull Acrylic Bathtub & Make It Shine

The bathtubs usually get contaminated with the grime and it does not matter of which material the bathtub is made of. The grime can make the tub look unappealing. Each time the users take the bath, they easily shed their dead skin, debris, oil, and the dirt particles that merge into the grime over the surface of the tub. The grime gets affixed to the surface of the tub with the time that causes the shiny fiberglass to get dull. The dull and dirty bathtubs appear to be unpleasant and do not get suited well in any styled bathroom area. The users can easily make a dull acrylic bathtub shine by gathering the below-mentioned materials and then following the below-defined steps:

Materials Required

  • Mild Dishwashing Liquid & Gallon Bucket
  • Cleaning Rags & Soft Towel
  • Car Wax

Procedure

  • Mix The Solution: Start by squirting the mild liquid soap into the water-filled bucket. The users need to fill up the large-sized bucket with the water and then mix up the solution thoroughly. The users can mix up the solution with the stick or with the hand till the soap suds are formed.
  • Apply The Solution: Then soak down the clean rag into the soap solution and then wipe down the rag over the entire surface of the bathtub especially to those areas that are badly affected by the build-up of the grime and the other stains as well.
  • Wipe Down The Soap Residue: They need to keep on wiping down the surface of the tub with the soap solution till all the stains and the build-up gets removed. Then rinse down the rag beneath the faucet of the tub as they cleaned off grime.
  • Use The Damp Rag: Then they need to saturate the other rag with the water. Then wipe down the entire soap surface within the surface of the bathtub by using the damp rag.
  • Buff The Surface Of The Tub: Then the users need to buff down the surface of the tub by using the soft dry towel. The users are advised not to leave any kind of moisture over the surface of the tub. The users need to examine the shine of the tub and if in case the surface of the tub is not that much shiny then they are advised to apply the car wax with another rag.
  • Evenly Distribute The Wax: Then wipe down the walls of the tub with the wax and then distribute the wax evenly all over the tub surface. Then allow the wax to get dried off completely. Then the users need to buff down the walls of the tub by using the fresh rag and clean off the unneeded wax buildup. The users need to keep on buffing down the walls of the tub till they achieve the shine as desired by the users.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2020 GetRit.Com   All Rights Reserved