How To Lubricate Door Hinges: Easy Process Of Lubricating Door Hinges

Easy Process Of Lubricating Door Hinges

Usually, the cause of squeaky or creaky doors is their hinges, therefore, you will need to oil the door hinges. To fix a squeaky hinge, you may just need to lubricate the hinge without taking anything apart. Sometimes, it is important to remove the hinge pin, which can be done quite easily using a hammer by tapping on the bottom of the pin with a nail. First, you need a substance to clean the door hinge in order to remove dirt build-up. Next, you will need a lubricant in order to make sure the hinge parts can move smoothly with little resistance or friction from other parts. There are many different options for lubricants that can help stop a squeaky hinge.

Purchase Suitable Lubricant

The lubricant that you will be using on door hinges should be capable of penetrating the grime as well as coating the interior of the hinge in order to keep it working effectively. It is important to get a thin nozzle can or container in order to access the hinge area. You should get a good as well as affordable spray lubricant from any hardware store. Good varieties, as well as brands to use on hinges, may include Silicone spray lubricants like Blaster or Tri-Flow, Lithium grease & Food-grade oils like olive, canola, or coconut oil.

Find The Hinge Pin

Each door hinge is composed or made up of the hinge itself and the pin used to take hold of the two components of the hinge together, the door to the wall. You should opt for the round hinge pin that sits betwixt the flat plates on the hinge. This hinge pin takes hold of the hinge plates together that will need to be removed to lubricate the hinge successfully.

Remove The Hinge Pin

Open the door before pulling out the pin some of the ways from the hinge. On some hinges, you may use your fingers, however, in all likelihood, you will need to use long pliers in order to move the pin anticlockwise to remove it. Make sure to keep away from scraping your knuckles. Some hinge pins can be rusted, otherwise, they will be very difficult to remove. If you are not able to get it loose, then the best option is to use a screwdriver or some PB blaster in order to help loosen the pin.

Clean, And Apply Lubricant

After you have removed the hinge pin successfully, you need to clean off the old grease as well as grime from the pin and the hinge plates with the help of a disposable rag or paper towel. After that, apply a thin coat of lubricant instantly onto the hinge pin, and into the hinge itself.

Reassemble The Hinge & Verify

Push the hinge pin back into place and make sure that it is secured. Open as well as close the door several times to work the lubricant around the entrails or insides of the hinges. If the door still keeps squeaking when you open and close it, then you need to repeat this process for each hinge as long as the squeak disappears.

Use A Rag Or Paper Towel To Clean Up

Wipe away any excess grime, oil drips, as well as dust from the hinge area to leave it clean. The build-up of grime is one of the main reasons for the hinge becoming squeaky in the first place, which makes it important to clean it up when you get the chance.

Soak Rusty Hinges In PB Blaster

If you are not able to remove the hinge pin from a sticky door, you need to soak it in some penetrating lubricant spray for nearly 12 hours before you try to remove it. WD-40 is one of the best products that is commonly used for this purpose. Spray a considerable amount of penetrating spray onto the hinge before allowing it to sit.

Gently Tap The End Of The Pin With A Screwdriver

After allowing it to soak, you need to use the end of the screwdriver in order to tap the pin through the hinge, pushing it out gently. This can be one of the effective as well as a successful way of getting the pin removed from the hinge in order to lubricate it.

Repair The Pin, If Necessary

Roll the pin on a flat surface in order to check if it is bent, and then examine the pin for signs of wear. If it is very rusty as well as bent, then it is best to spend a small amount of time straightening it out before cleaning it up and re-installing it, in order to make sure that you can avoid a squeaky door in the future.