How To Lay Travertine Tiles Around A Pool: Easy Process Of Installing Travertine Tiles Around A Pool

Easy Process Of Installing Travertine Tiles Around A Pool

Travertine is a natural stone product that originates inside hot springs. The eluding or absconding water vapor from the cooling stone generates several holes, pits, as well as channels within the stone that give it a clear rustic look. Travertine tiles work exceptionally well for outdoor use in the majority of the applications around the home as well as a garden. The warm-colored tiles can match & go with many areas of the home's exterior in a variety of settings. Selecting travertine when it comes to the pool deck is one of the great decisions for your property. With numerous benefits, travertine will provide a new lease of life to pool surround or pool deck. Installing travertine pavers around pools is an easy process, however, you will need a fair amount of preparation.

Preparation

First of all, you need to dredge the area and compact the soil. It is important to remember that the soil is leveled. If the soil is having uneven or non-uniform levels, then it will only cause the stones to be laid in an irregular or non-uniform pattern. After that, you need to lay a fabrication sheet on top of the soil.

The Base

Add crushed limestone base at least 4 inches thick before pouring a 4 to 6 inches concrete slab. Now, combine & put together dry sand & cement & prepare a dry setting bed. Make sure not to add any water. The dry sand & cement solution is screeded and the base is prepared.

Laying Travertine Onto The Base

As soon as the base is ready, it is time to lay travertine pavers on top of it. Start the process by placing from the edge of the path to the inside. It is strongly recommended to lay or position pavers from left to right fashion. Also, you should begin from a faraway corner, & work your way backward. Lay or place the pavers one by one in a continuous line using a string. Make sure to use a soft hammerhead in order to compact as well as level the base.

Paver Cutting And Joints Filling

You will find that laying travertine paver is a simple process as you proceed. Finally, you need to cut the pavers wherever required as well as fill the joints. It is highly recommended to sand when it comes to filling the joints. An easy way to do it is to sweep the sand over the paved pool area as long as all of it is in place. The best sand for this process is polymeric sand which also helps in inhibiting the growth of weeds betwixt the joints. As soon as all sand has been swept in, mist the pavers, before setting the sand further. This will complete the dry-set process as well as the pool pavers laying.