How To Keep Vinyl Plank Flooring From Moving: Different Ways Of Keeping Vinyl Plank Flooring From Moving


Different Ways Of Keeping Vinyl Plank Flooring From Moving

Vinyl plank flooring has a numerous benefits, which may include water resistance, a wear layer in order to protect scratches as well as chips, economical, the beauty of the real deal, etc. However, the majority of the homeowners are not satisfied with their vinyl plank flooring & the main reason for dissatisfaction is vinyl plank flooring separation. Vinyl plank flooring separation is simply the formation of gaps or separations in between the vinyl planks. There are different factors that cause or give rise to expansion and contraction of vinyl planks as well as incapacitate inter-planks bonds, ultimately leading to such gap formation. In order to solve the vinyl plank separation problem or keep vinyl plank flooring from moving, go through the below-mentioned different ways carefully:

Using Suction Cups

Use a suction cup as well as a rubber mallet when it comes to bringing back the planks to their original position. Clean the area on every side of the plank, before using a vacuum cleaner in order to clean the gap you are trying to get rid of. As soon as the gap is clean, add some caulk to the gap before attaching a suction cup to the plank. Hit the suction cup with a rubber mallet in order to close the gaps. Once the gap closes, get rid of the excess caulk with the help of a damp finger.

Using A Scrap Piece And Double-Sided Tape

If a suction cup doesn’t work with the texture of your vinyl flooring, then another option is to attach or secure a few strips of double-sided tape to a scrap piece of wood. Peel the other side of the tape before attaching the scrap wood to the vinyl plank that needs fixing. As soon as the wood is nicely attached to the plank, hit it firmly or softly with the help of a rubber mallet towards the direction that closes the gap. This method also works equally well, so, if you don’t have a silicone cup, this method can be used easily, instead.

Using Wood Putty

For vinyl floor planks having a wooden print as well as texture, and for gaps that are relatively small, you can solid fill the gaps with the help of wood putty that matches the color palette of your planks exceptionally well. And make sure to clean the gaps in advance. However, this method is a great option only if both of the planks have similar colors. If one plank is dark and the other one is bright, then the putty doesn’t work well prominently. So, this method is only recommended if the above two method doesn't work in your case and the gap is very small. Moreover, while matching the wood putty color to your planks, it is important to observe the putty color while wet as well as dry, due to the fact, that the color as well as tone of some putty can change drastically once dried.

Caulking

Like wooden putty, caulk can also be used when it comes to solid fill the gaps. Select either latex, acrylic, or silicone caulk before covering the floor near the gap using masking tape. Make sure the gap is rigorously cleaned and vacuumed in advance. Now, caulk the gaps with utmost care. As soon as it is dried, pull out the masking tapes and remove the excess caulk using damp fingers. If you are looking to match the caulk color with your vinyl color palette, then stain and blend in your caulk accordingly.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2022 GetRit.Com   All Rights Reserved