How To Install Vinyl Baseboard Around Corners: Installing Vinyl Baseboard Around Corners Of A House

Easy Process Of Installing Vinyl Baseboard Around Corners Of A House

Vinyl baseboard trim is a practical, durable, and lovely option for sealing the corner where your flooring meets the wall. Vinyl baseboard and trim are weather-resistant and won't warp like wooden ones do. Also, it is simple to install with the use of a utility knife and some baseboard adhesive. High usage areas like kitchens and leisure rooms are the greatest places for vinyl trim. Your walls are protected with a stylish, long-lasting vinyl baseboard. The majority of the time, installation is simple and doesn't call for many tools. It might be challenging to get the baseboard to lie flat on the wall around an external corner. Unattractive gaps can be found around these corners. Like with other jobs, there are trade secrets that can make your installation appear more polished.

Step 1: Choose The Right Vinyl Baseboard

Select the appropriate vinyl baseboard for your space. The majority of molding will be four inches tall and around 1/4 inch thick. Use the rolled base vinyl trim, which has a straight bottom edge, for carpeted flooring. Use the cove trim, which has a base that is gently flared out away from the wall, for all other floors. The first piece you place goes against the first corner. The longest wall's corner should be butted up tightly to the wall first.

Step 2: Remove The Molding From The Wall

Lay the molding that was removed from the wall face down on a piece of wood or a workbench. Apply base adhesive to the baseboard's back using your notched trowel. Don't lay it on too thick, but make sure to cover the entire surface that will be in contact with the wall. The secret is to spread the glue while holding the trowel at a 45-degree angle. To attach the vinyl trim to the wall, push it up against the wall and firmly press down along the base. If the trim protrudes excessively, you might be applying more glue than is required. Make sure the vinyl trim is level with the ground by pressing along its length with your hands. Take a step back and scan the vinyl baseboard for ridges and rises. Before adding your next component, make any necessary adjustments. Work your way around the walls and into the corners of your area.

Step 3: Cut Strips Using A Square For Ends And Joints

Strips should be cut with a square for joints and ends. Place the trim piece where it should go and use a pencil to mark the length. On a board or workbench, place the vinyl baseboard facing down. In order to be next to the pencil mark, place the square there. Use a utility knife to score the molding repeatedly until you've gone all the way through it while maintaining a firm grip on the square. Once you're done cutting, adhere the strips, then check their straightness.

Step 4: Fold The Vinyl Trim Around The Exterior Corners

Using your hands, fold the vinyl trim around the exterior corners. Since the molding forms smoothly around the outside, outside corners don't require complete cutting. When the vinyl baseboard is properly folded, trim off the outside crease on the exterior of the baseboard by using a utility knife to take off roughly half the thickness of the trim. As a result, the trim can wrap neatly over the wall's corner. Once the trim has been cut, glue it in place.

Step 5: Cut The Vinyl Baseboard To Fit Into The Corner Of Inside Joints

Vinyl baseboard should be precisely cut to fit inside joints' corners. The vinyl that needs to be cut to fit against the wall should be measured. Using a utility knife and square, cut the trim from the vinyl by laying it down face down. The baseboard doesn't have to be completely sliced through in one attempt. Use the knife numerous times, scoring a little bit more each time, until you completely pierce the material. At that point, adhere the vinyl. Cut the vinyl baseboard trim to match the shape of the already-glued piece on the adjacent side of the inside corner. By examining a piece of trim, you can make an educated guess that you can refine through trial and error. When the other piece is cut and properly fits, glue it at the joint.

Step 6: Create A Template For The Inside Corners

After you have successfully done one cut, create a template for the inside corners. Use a piece of cardboard or thick paper to accomplish this. Once you're done, go around the room cutting and adhering as you went, following the instructions above. Make an effort to ensure that outside corners don't need to be trimmed very near to the corner and have lengths of trim on both sides.