Easy Procedure & Items Required To Install Rubbermaid Twin Track Shelving
The Rubbermaid twin track shelving usually consists of various elements. Firstly two tracking sets are affixed diagonally over the wall and secondly, the brackets of the shelves glide within the lateral tracking slots. Then the shelves completely rest over the bracket top and these shelves are very easy to get installed as they do not demand any high-grade tools. The users can easily install the Rubbermaid twin track shelving at home by gathering the below-mentioned materials and then following the below-mentioned procedure:
Materials Required
- Pencil, Measuring Tape & Level
- Drill, Hollow Wall Anchors
- Screws & Screwdriver
Procedure
- Place The Shelves: Start by placing one of the shelves adjacent with the wall and at that place where the users want to install their Twin Track Shelves. Then they need to make the mark over the wall at the shelf end by using the sharp pencil. Then they need to place the shelves over any flat surface and at a safe place as well.
- Detach The Tracks: Then the users need to place the track of the shelves adjacent to the wall at near about six inches inwards from the exterior corner of the right-sided mark. Then they need to place the level diagonally adjacent to the track so as to be assured that it is in the perpendicular shape. Then the users need to mark down the position of the affixing screw holes within the track over the wall surface. They need to repeat the same procedure with another shelving track but this time they need to estimate it within the left-sided mark. Then they need to carefully detach the tracks.
- Affix The Screws: After that, the users need to drill the holes within each marked area over the surface of the wall. Then they need to line up the cavern wall anchors within the drilled holes and then line up the tracks over the surface of the wall and then align the affixing holes upwards with the cavern anchors. Then the users need to put the screws within the tracks and within the wall anchors as well. Then they need to fasten the screws by using the screwdriver accordingly.
- Arrange The Shelves: Finally the users need to clutch the track brackets within the track as per their desired height and then, at last, they need to arrange the shelves above the brackets respectively.