How To Install Linoleum Flooring In Kitchen: 7 Easy Steps For Installing


How to Install Linoleum Flooring in Kitchen

The users can easily Install Linoleum Flooring in Kitchen by following the below-mentioned steps:
  1. Gather All The Materials And Tools: The users need to start by gathering all the tools and the material that they require while performing this job like Plywood floor stapler, Floor roller, Linoleum tiles, Tape measure, Flooring adhesive, Trowel, Utility knife, and chalk line as well.
  2. Detach The Baseboards And The Nails: Detach all the baseboards from the walls and then detach the nails as well. After that, they have to examine their subfloor and if they find out that their subfloor is rough or uneven then they need to cover the subfloor with the 1/4-inch plywood sheets. Use the plywood floor stapler and staple the plywood in every 8 inches to easily create a smooth and even leveled floor.
  3. Find Out The Center Of The Floor: Then they have to find out the center point of the floor and to find out that they have to draw the chalk line to each center point of the wall and they have to intersect the each drawn chalk line. The uses will find out a middle point where all the lines intersect each other and that is the center point of the floor.
  4. Lay The Linoleum Tiles: Find out the center pint of the room then lay the Linoleum tile to the exact center point and then lay the other Linoleum tiles accordingly but the users are advised that they should not apply any adhesive material to the Linoleum tiles.
  5. Use The Knife To Trim The Tiles: Use the utility knife and trim out the tiles at the edges of the walls to make them fit perfectly. After that, apply the adhesive to the Linoleum Flooring by using the soft towel and apply the adhesive in the round motions. Lay back the linoleum tiles in their way and gently press them.
  6. Run The Floor Roller: Once the users install all the Linoleum Flooring tiles then they have to use the floor roller and run it over the entire surface of the floor to securely install all the tiles.
  7. Re-attach The Baseboards: At last, re-attach all the baseboards to the walls and allow the floor to dry completely before walking over it.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved