Easy Process Of Installing Gutters Without Fascia
Gutters are regarded as one of the important parts of your home, due to the reason that they will help direct rain as well as melted snow away from your home, which in turn keeps it safe from rot, leaks, and erosion. It is important for your home to have gutters even if you don’t have fascia. Without having fascia, you can still install gutters by using roof straps. You simply need to fit them into the gutter’s hanger before attaching directly to your roof. The straps will function as a sling that will help keep the gutters fitted securely to your roof. There is no need to have a fascia when it comes to installing gutters to your home. However, fascia boards have huge number of essential functions that you will want to recreate in some way if there is no fascia. One of the important functions that fascia boards should have provided you is a solid foundation for your gutters. They can also be very helpful in order to keep pests out of your home. Before proceeding with the installation of gutters without fascia, you need to keep in mind the functions that fascia should have accomplished, as you have to start thinking about how to recreate those functions in another way.
- First of all, ascertain the size, amount, or degree of your house and note your planned drain spout or drainpipe areas and any demanding sections that may need special attention. From the ground, trim the gutter to your desired length. Trim the front as well as back sides with the help of tin snips. Then, bend the gutter as required and trim the bottom.
- Make notches in the gutter with the help of your tin snips in order to easily connect the section with a corner piece down the line. Snap the sections together by putting down gutter gently or carefully sealing about 1-1/2-inch from the edge. Discover the notched section of the gutter, attach or fasten the front lip of the corner over it using hook, before snapping it over the gutter.
- Rivet the sections by first drilling a 1/8-inch hole at the front of the gutter. Place or fix the first rivet with the help of your rivet gun, then repeat this process as long as you have made every rivet you need.
- Caulk the seams with the help of gutter sealant inside the gutter and over each rivet. Preassemble it all before you take it up the ladder with you. Mark the drain spout or downpipe outlet.
- Trim the outlet hole with the help of your offset tin snips, nearly 1/16-inch from the outside line. Rivet the outlet in the hole with the help of pre-drilled 1/8-inch holes. Calculate or compute the slope you need.
- Now, mark the gutter slope before attaching the gutters to your home with the help of roof straps. Put together gutter flashing to present water from getting beyond your gutters. Ideally, this should be placed or fixed underneath your shingles and any ice or water barrier that you may have in place. Secure or fix elbows to your drain spout or downpipe.
What Can I Use Instead Of Gutters?
Gutters serve important functions, and they can also be very expensive to install and difficult to maintain. Therefore, you need to replace some of their functionality with a gutter alternative that is cheaper as well as easier to install. There are several different options you can select to install gutters without fascia, including the following:
- Rain Chains
- Rain Dispersal Systems
- Grading
- Drip Edges
- Ground Gutters
- Drip Paths
- Built-In Gutters
Each of the above alternatives is a viable way when it comes to keeping your home safe from erosion as well as water damage. However, it is also true that there are different needs for every house. You need to check with an expert before making any decision to forego gutters. Doing so will make sure that you don’t make a mistake that could end up costing you more rather than installing gutters.