Steps To Install Engineered Wood Flooring Over Plywood
The steps to install the Engineered Wood Flooring Over Plywood are mentioned below:
- Step 1: Begin with pre-drilling the first row and nail with the finishing nails that should be 1 inch from the wall, use the nail punch and fill the holes using the wood filler.
- Step 2: For the 2nd and 3rd row, drive the staples after every 3 to 4 inches at an exact angle of 45, degree, the staples must not interfere with the tongue and groove of the other board.
- Step 3: Pneumatic stapler will be very difficult to operate in a small space and this is the reason the last row will be face nailed.
- Step 4: Once the floor is completed then remove the spacers and install the transition pieces.