How To Install Cork Flooring: 6 Easy Steps

Steps To Install Cork Flooring

1. Plan: First of all plan the new cork floor, simply plan the floor on the graph paper.
2. Prepare The Old Floor: The old floor should be flat and smooth before installing the cork flooring, if the subfloor is flat then Fill and sand the subfloor, fill all the seams and depressions with a Portland cement–based floor leveler.
3. Adhesive: Now spread the adhesive according to the snap layout lines, it is best to Spread the contact adhesive ahead of time, which means that figure out how many tiles to be installed than roll the adhesive onto their backsides and leave it over night.
4. Lay: Now spread the adhesive on the floor and wait for 30 minutes, then lay the flooring according to the design.
5. Cut: Cut the flooring tiles with a simple jig, simply make a clean straight cuts.
6. Sand: At last Sand and finish the cork, Sand off high spots.