How To Install Carpet Without Tack Strips: Instructions Of Installing Carpet Without Tack Strips

Step By Step Instructions Of Installing Carpet Without Tack Strips

1. Select Your Method: As you have to install the carpet without using tack strips, there are several alternative methods that you can use, including staples, carpet adhesives, magnetic flooring, etc. The execution of your project is totally dependent on the selected method. Therefore, it is extremely important to select the method that is appropriate for carpet installation.
2. Prepare Your Floor: Before the installation of any carpet or underlayment, the first and foremost thing to do is to clean your floor. Make a mixture of some warm water with a few drops of dawn dish soap in a container and clean your floor using this mixture and an old rag. This cleaning process will be able to get rid of all the dust as well as dirt from the floor.
3. Dry Your Floor: After cleaning your floor where you are going to install a carpet, allow them to dry completely. In order to help quicken the drying process, take a towel and wipe up any excess water. Make sure that you get deep into the corners, to wipe away the excess water, due to the fact that water likes to spread into cracks. Let it sit for an extra half-hour to allow it to get fully dry so that it does not give support, confidence, or hope to give support, confidence, or hope to any mold growth.
4. Apply Your selected Method: Here we will go with carpet adhesive. Apply a layer of your selected carpet adhesive to all the corners of the area you want the carpet to stick to. The area covered should be nearly 1 to 1.5 feet long. If you are using staples, then you will need to set the carpet and staple all the corners down, as well as the middle.
5. Place Your Carpet: Now, put, place, or stand your carpet onto the area where you have applied the adhesive, and make sure that all the wrinkles, as well as lumps, are removed before allowing it to set. Then, use a roller or wooden plank in order to roll through the carpet to be certain that it catches onto the carpet.
6. Check The Area: No matter which method you have used to install the carpet, you will need to double-check whether you have made the carpet night and snug in opposition to the stairs. This is the most important factor of the project, as it will help prevent accidents.

Tack Strip Alternatives

• Carpet Tiles: If you have not purchased the carpet yet, one of the best alternatives is to get carpet tiles or carpet squares instead. They are the best options when it comes to installing carpets, due to the reason that they are quick as well as easy to install. There is no need to stretch out any portion of the carpet. You also don't need any nails, boards, extra adhesive, or tack strips. If in case one tile gets damaged, you can easily remove it and replace it with a new one without having to pull out the entire carpeting.
• Carpet Adhesive: To install carpet without using tack strips, you can use an industrial carpet adhesive, usually known as carpet seam epoxy. Its ultra adhesive synthetic latex resins is an exceptional alternative to tackless strips. You can use epoxy on wood as well as concrete. It doubles as a seam adhesive in order to prevent the edges of the carpet from wearing out. It generally sets within 15 minutes and entirely cures in half a day to one day. Spray Tack carpet adhesive is highly recommended, which is available at home depots, hardware stores, as well as carpet supply shops. Spray Tack is an adhesive that can be sprayed on for fast application. It is used for bonding surfaces to numerous substrates. It is helpful for efficient positioning as well as the attachment of the carpet to the subsurface. The product’s splatter spray system makes certain a wide and even coverage. Its strength, flexibility, as well as weatherproof structure, certifies a tight bond. It is suitable for needle-punch carpet installation.
• Staples: Staples can pierce carpet material and take hold of solid wood, providing a safe, tight, as well as secure fit. Attaching carpets with staples makes sure that they do not tear. However, like tacks, staples spoil the surface or appearance of the underlying wood. They get rusty with the passage of time and may cause the carpet to become progressively worse faster in areas they poke through. Staples cannot be used on concrete, just like tacks.