How To Install Bathroom Cabinet: 8 Easy Steps To Install


8 Easy Steps To Install Bathroom Cabinet

The users can easily install the bathroom cabinets by following the below-described steps:
  1. Collect All The Tools And Materials: The users need to start by gathering all the tools and the materials that they require while accomplishing this task like Newspaper, Anchor bolts, Masking tape, Paint drop cloth, Pencil, Wood putty, level, Stud finder, Scrap wood, drill, and wood screws as well.
  2. Trim The Newspaper: Once the users have gathered all the required material then they need to trim the newspaper as per the cabinet size and then affix the trimmed newspaper to the wall by using the masking tape so as to find out the best place for the cabinets. The users may also require taping down many newspaper pieces if they are having the large-sized cabinet.
  3. Evaluate The Area: The users need to use the pencil and the yardstick to make the line mark where the lowermost corner of the cabinet will be located at the wall. The users need to make sure that the placement of the wall cabinet should line up ideally along the base.
  4. Settle The Studs: Use the stud finder in order to locate the stud on the bathroom wall and then use the pencil to mark the area of the stud respectively.
  5. Detach The Cabinet Doors: The users then need to detach the doors of the cabinets by unbinding all the metal hardware like knobs, hinges, as well as screws. The users are also advised to save the metal hardware in a small bowl so as to use them again in future.
  6. Build The Pilot Holes: Use the electric drill and start building the pilot holes at the cabinet back. The users need to make sure that the pilot holes must be smaller in size than the total perimeter of the screws that the users are used to affix the cabinet. Build the holes at the edges in the backside cabinet wall.
  7. Affix The Screws: The users need to drill the wood screws that must be either 2 inches or 3 inches in size into the point holes through the wall studs. The users also need to check out the posture of the bathroom cabinet before affixing the wood screws by using the level.
  8. Re-attach The Cabinets: Once the wood screws are affixed tightly with the wall the users then need to re-attach the doors by using the pre-existing metal hardware.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved