How To Install An Offset Wheel Roller For A Closet Door: Easy Process Of Installing Wheel Roller For Closet Door


Easy Process Of Installing An Offset Wheel Roller For A Closet Door

The majority of the older homes generally used bi-pass closet doors, which more often then not wear out, bind, stick or fail. However, one of the good things of bi-pass closet doors is they are simple & easy to replace. Offset rollers secure or affix to the side of the door. The roller rides through a track. It may be at the top, or at the top as well as bottom. If you are getting a workout sliding closet doors, then it is time to replace the rollers by placing or fixing new ones. Go through the below-mentioned steps carefully if you are looking t install an offset wheel roller for a closet door:
  • First of all, take hold of the closet door with both hands and lift it up. Tilt the underside of the door in the direction of your body before removing it from the track. Position it across two sawhorses. You need to make sure that the back of the door should be positioning towards up.
  • Now, pull out the screws taking hold of the wheels to the side of the door, with the help of a drill/driver. The wheels secure or fix to the underside of a rectangular plate. The plate usually screws to the side of the door.
  • Next, buy a new roller using the old wheel as well as plate for reference. Attach or secure the wheel on the door with the help of a 3/4-inch screw in the primary screw hole in the oval-shaped slot in the metal plate.
  • After that, install the door back on the track. Examine the door for plumb with the help of a level. If the door is not plumb, it is important to loosen the screw as long as you can lift or pry the door up or down if needed using a screwdriver underneath the corner to level it.
  • Finally, tighten the screw as soon as the door is level. Position the screws in the additional drilled holes in the plate before tightening the screw. Reverse Step 1 in order to install the door.

How To Replace The Sliding Closet Doors?

The sliding doors are built in a way to glide horizontally on the metal tracks that are fixed on top as well as on the bottom frames. There are the rollers right on the side of the door for the opening purpose. On the opening, the shutter-like closings recede in a slot, without any getting into the outward space, if the user wants to replace the sliding closet doors then follow the steps mentioned below carefully:
  • Start the job simply by removing the old door. For that pop the door rollers off from the track, the user needs to unscrew the track from the header and after that remove it.
  • Once the above step is done then take a pry-bar or the claw hammer, pull off all the trim as well as casing of the old door opening.
  • Now frame in the new opening for the closet, start the measurement from the outside of the existing opening, for instance, if the measurement is 31 inches from each side, and nail in 2x4 uprights. Also, it is important to make sure they are vertical at a proper level. Space that is between the 2x4's is filled in with the drywall. Once the user has made sure that there is a 31-inch opening for both doors, after that measure the space between the openings of a new door as well as cut a piece of the drywall to fit.
  • The important point to remember is that the drywall is very easy to cut. Simply start by scoring into the paper covering with the help of a utility knife. Screw-in the drywall to the 2x4s from the inside, as well as also install another piece from the outside. Prime as well as paint the drywall.
  • Install the doors simply by nailing the doorframe right on the hinge side with the frame, then make sure the doorframe is at the proper level. The next step is to make sure that the top is at level, after that work down the latch side, also it must be at the level. Use the carpenter's shims to make everything tight. Finally, the user needs to install the casing and trim with the help of a finish nailer. Prime as well as paint all the doors and trim.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved